UNIVERSAL DIN RAIL TRANSMITTER
SEM1620
SIMPLE CONFIGURATION VIA USB PORT UNIVERSAL PT100, THERMOCOUPLE, mV, mA Input ISO...
UNIVERSAL DIN RAIL TRANSMITTER
SEM1620
SIMPLE CONFIGURATION VIA USB PORT UNIVERSAL PT100, THERMOCOUPLE, mV, mA Input ISOLATED INPUT PUSH BUTTON USER TRIM THREE WIRE ISOLATED
VOLTAGE OUTPUT
INTRODUCTION
The SEM1620 is the new generation DIN rail mounted temperature amplifier from Status Instruments. It has been designed to accept most common process and temperature sensor inputs and provide the user with a three wire
voltage output signal. Isolation is provided between input and output and all temperature ranges are linear to temperature.
Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1620 and your PC. Using our free configuration software, your PC will automatically upload the existing configuration data and guide you through any changes you wish to make. To further help save time, the SEM1620 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC. The following parameters are configurable :-
INPUT TYPE
LOW RANGE HIGH RANGE
UNITS
OUTPUT
BURNOUT
USER TRIM
PT100
T/C K, J, E, N, T, R, S mV
Input @ 4 mA Input @ 20 mA
°F, °C °F, °C
mV
(0 to 10) V (2 to 10) V (0 to 5) V (1 to 5) V (0 to 1) V
Up/Scale Down/Scale
On , Off
mA mA
The SEM1620 is also provided with user push button trim, allowing trim adjustments at both offset and span. The user trim function can be locked during configuration if not requ...