SH66P12
OTP 4-bit Microcontroller with LCD Driver
Features
SH6610C-based single-chip 4-bit microcontroller with LCD...
SH66P12
OTP 4-bit Microcontroller with LCD Driver
Features
SH6610C-based single-chip 4-bit microcontroller with LCD driver
ROM: 2048 X 16 bits RAM: 256 X 4 bits (Data memory) Operation
voltage: 2.5V - 5.4V 16
CMOS I/O pins
-
CMOS or Open Drain (code option) 4 level subroutine nesting (including interrupts) Two 8-bit timer/counter with pre-divider circuit Oscillator warm-up timer 4 priority interrupt sources:
- External interrupt (falling edge) - Timer0 interrupt - Timer1 interrupt - PortB interrupt (falling edge)
Oscillator - 32.768KHz crystal or 262K RC (code option)
Instruction cycle time:
- 4/32.768KHz (≈ 122µs) for 32.768KHz OSC clock
- 4/262KHz (≈ 15µs) for 262KHz OSC clock LCD driver:
- 4 X 26 (1/4 duty, 1/3 bias or 1/3 duty, 1/2 bias) Two low power operation modes: HALT or STOP mode Built-in alarm generator carrier frequency:
- 2KHz or 4KHz (code option)
Low power consumption (Iop < 10µA, 32.768KHz, 3V) Bonding option for multi-code software Available in CHIP FORM
General Description
SH66P12 is a single-chip microcontroller integrated with an SH6610C 4-bit CPU core, SRAM, timer, alarm generator, LCD driver, I/O port, and program ROM.
Pad Configuration
SEG16 SEG15 SEG14 SEG13 SEG12 SEG11 SEG10
SEG9 SEG8 SEG7 SEG6 SEG5 SEG4 SEG3
SSSSSSSSSS E E E E E E E E E E CC GGGGGGGGGGOO 1 1 1 2 2 2 2 2 2 2 MM 789012345612
38 37 36 35 34 33 32 31 30 29 28 27 39 26 40 25 41 24 42 23 43 22 B1 44 21
45 SH66P12 20
46 19
47 18 48 17 49 16
50 1...