SH69P43
OTP 4-bit Microcontroller with SAR 8-bit A/D Converter
Features
The SH6610D-based single-chip 4-bit microcontr...
SH69P43
OTP 4-bit Microcontroller with SAR 8-bit A/D Converter
Features
The SH6610D-based single-chip 4-bit microcontroller with 8-bit SAR A/D converter OTP ROM: 3072 X 16 bits RAM: 192 X 4 bits - System register: 48 X 4 bits - Data memory: 144 X 4 bits Operation
voltage: - fOSC = 400KHz - 4MHz, VDD = 2.4V - 5.5V - fOSC = 8MHz, VDD = 4.5V - 5.5V 24
CMOS bi-directional I/O pins Built in pull-up for I/O port Two 8-bit auto re-load timers/counters, One can switch to external clock source 8-level subroutine nesting (including interrupts) Powerful interrupt sources: - A/D interrupt - Internal interrupt (Timer1, Timer0) - External interrupts: Port A - D (Falling edge) Oscillator: (OTP option) - Crystal oscillator: 32768Hz, 400KHz - 8MHz - Ceramic resonator: 400K - 8MHz - External ROSC RC oscillator: 400K - 8MHz - Internal ROSC RC oscillator: 4MHz - External clock: 30K - 8MHz Instruction cycle time: - 4/32.768KHz (≈ 122µs) for 32.768KHz - 4/8MHz (= 0.5µs) for 8MHz at VDD = 5.0V 8 channels 8-bit resolution A/D converters 2 channels 10-bit PWM outputs Warm-up timer for power on reset Low
voltage reset function (LVR) Internal reliable reset circuit Built-in watchdog timer Two low power operation modes: HALT and STOP OTP type/Code protection 28-pin SOP/SKINNY package
General Description
The SH69P43 is an advanced
CMOS 4-bit microcontroller. It provides the following standard features: 3K words of OTPROM, 192 nibbles of RAM, 8-bit timer/counter, 8...