SH79F081A
Enhanced 8051 Microcontroller with 10bit ADC
1. Features
8bits micro-controller with Pipe-line structured ...
SH79F081A
Enhanced 8051 Microcontroller with 10bit ADC
1. Features
8bits micro-controller with Pipe-line structured 8051 compatible instruction set
Flash ROM: 8K Bytes RAM: internal 256 Bytes EEPROM-like: 2K Bytes Operation
Voltage:
fOSC = 400kHz - 16MHz, VDD = 3.6V - 5.5V Oscillator (code option):
- Crystal oscillator: 400kHz - 16MHz - Ceramic oscillator: 400kHz - 16MHz - Internal RC: 12.3MHz 26
CMOS bi-directional I/O pins Built-in pull-up resistor for input pin Three 16-bit timer/counters T0, T1 and T2 One 12-bit PWM Two 8-bit PWM Powerful interrupt sources: - Timer0, 1, 2 - INT0, 1 - INT4: 6 input - ADC, EUART, SPI, PWM
EUART SPI interface (Master/Slave Mode) 8channels 10-bits Analog Digital Converter (ADC),
with comparator function built-in Buzzer Low
Voltage Reset (LVR) function (enabled by
code option) - LVR
voltage level 1: 4.1V - LVR
voltage level 2: 3.7V CPU Machine cycle: 1 oscillator clock Watch Dog Timer (WDT) Warm-up Timer Support Low power operation modes: - Idle Mode - Power-Down Mode Flash Type Package: - SOP28 Pin
2. General Description
The SH79F081A is a high performance 8051 compatible micro-controller, regard to its build-in Pipe-line instruction fetch structure, that helps the SH79F081A can perform more fast operation speed and higher calculation performance, if compare SH79F081A with standard 8051 at same clock speed.
The SH79F081A retains most features of the standard 8051. These features include inter...