celpac®
AC Semiconductor Contactor pitch 22,5mm compact size and DIN rail mounting.
t Ready to use Single-Phase Relay: " Install it & Forget it!" t Zero cross model : 24-510VAC 35A back to back thyristors on output TMS2 technology - I2t value > 1150A2s t Large control range : 3,5-32VDC with an input current < 10 mA on all the range. Green LED visualization on the input. t Very high immunity www.DataSheet4U.com t IP20 housing t Low leakage current (<1mA) and low zero cross voltage . t Mounting an.
AC Semiconductor Contactor
celpac®
AC Semiconductor Contactor pitch 22,5mm compact size and DIN rail mounting.
t Ready to use Single-Phase Relay: " Install it & Forget it!" t Zero cross model : 24-510VAC 35A back to back thyristors on output TMS2 technology - I2t value > 1150A2s t Large control range : 3,5-32VDC with an input current < 10 mA on all the range. Green LED visualization on the input. t Very high immunity www.DataSheet4U.com t IP20 housing t Low leakage current (<1mA) and low zero cross voltage . t Mounting and dismounting on DIN rail without any tool or directly mountable on panel. t Designed in conformity with EN60947-4-3 (IEC947-4-3) and EN60950 -UL-cUL pending Dimensions : : Voltage protection on output and input- 4kV according IEC61000-4-4 & 5
S/CLP/SIL863170/B/21/04/2004
page 1 / 4GB
SIL863170
Output : 24-510VAC 25A(*) Input : 3,5-32VDC / I<10mA
(*) see conditions (thermal curve page 3)
400VAC 50hz
Protection
L1
SSR
Typical application: 8kW resistor (AC-51 load) on 400 VAC
T1 A2 A1
- +
Control
load LOAD
Proud to serve you
All technical caracteristics are subject to change without previous notice. Caractéristiques sujettes à modifications sans préavis.
r
celduc
e l a i
s
celpac®
Control characteristics (at 25°C) Paramètre / Parameter Control voltage Control current (@ Uc ) Release voltage Input LED Reverse voltage Clamping voltage Input immunity : EN61000-4-4 Input immunity : EN61000-4-5 Output characteristics (at 20°C) Parameter Load voltage Operating range Peak volta.