DatasheetsPDF.com

SMA12 Datasheet

Part Number SMA12
Manufacturers MIC
Logo MIC
Description SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
Datasheet SMA12 DatasheetSMA12 Datasheet (PDF)

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMA5.0 THRU SMA170CA Stand-off Voltage Peak Pulse Power 5.0 to 170 Volts 300 Watts FEATURES • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition Rate (duty cycle): 0.01% • Fast response time: typical less than 1.0ps from 0 volts to BV for unidirectional types • Typical ID less than 1μA above 10V • Hi.

  SMA12   SMA12






Part Number SMA12
Manufacturers LITE-ON
Logo LITE-ON
Description TRANSIENT VOLTAGE SUPPRESSORS
Datasheet SMA12 DatasheetSMA12 Datasheet (PDF)

LITE-ON SEMICONDUCTOR SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS SMA SERIES STAND-OFF VOLTAGE - 6.8 to 200 Volts POWER DISSIPATION - 400 WATTS FEATURES Rating to 200V VBR For surface mounted applications Reliable low cost construction utilizing molded plastic technique Plastic material has UL flammability classification 94V-O Typical IR less than 1uA above 10V Fast response time: typically less than 1.0ps for Uni-direction,less than 5.0ns for Bi-direction,form.

  SMA12   SMA12







Part Number SMA12
Manufacturers Tyco Electronics
Logo Tyco Electronics
Description 10 TO 1000 MHz CASCADABLE AMPLIFIER
Datasheet SMA12 DatasheetSMA12 Datasheet (PDF)

A12/SMA12 10 TO 1000 MHz CASCADABLE AMPLIFIER · LOW NOISE: 2.8 dB (TYP.) · HIGH GAIN: 16 dB (TYP.) · MEDIUM OUTPUT POWER: +8 dBm (TYP.) · LOW VSWR: <1.6:1 (TYP.) Specifications (Rev. Date: 11/00)* Characteristics Frequency Small Signal Gain (min.) Gain Flatness (max.) Reverse Isolation Noise Figure (max.) Power Output @ 1 dB comp. (min.) IP3 IP2 Second Order Harmonic IP VSWR Input / Output (max.) DC Current @ 15 Volts (max.) Typical 0° to 50°C Typical Performance @ 25°C Guaranteed -54° to +85.

  SMA12   SMA12







SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMA5.0 THRU SMA170CA Stand-off Voltage Peak Pulse Power 5.0 to 170 Volts 300 Watts FEATURES • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition Rate (duty cycle): 0.01% • Fast response time: typical less than 1.0ps from 0 volts to BV for unidirectional types • Typical ID less than 1μA above 10V • High temperature soldering: 250℃/W seconds at terminals • Plastic package has Underwriters Laboratory Flammability Classification 94V-O DO-214AC(SMA) Dimensions in inches and (millimeters) MECHANICAL DATA • Cass: JEDEC DO-214 AC, low profile molded plastic • Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 • Polarity: Indicated by cathode band except bi-directional types • Weight: 0.002 ounces, 0.064 gram • Standard Packaging: 12mm tape per (EIA-481) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • Ratings at 25℃ ambient temperature unless otherwise specified Peak Pulse Power Dissipation at TA=25℃(NOTE1,2,5)Fig.1 Peak Forward Surge Current per Figure 5 (NOTE 3) Peak Pulse Current on 10/10000μs wave from (NOTE1,FIG.2) Steady Stage Power Dissipation (Note 4) Operating Junction and Storage Temperature Range Symbols PPPM IFSM IPPM PM(AV) TJ, TSTG Value Minimum 400 40.0 See Table 1 1.0 50 to + 150 Notes: 1. Non-repetitive current pulse, per Fog.3 and derated above TA=2.


2015-11-02 : TP4212B    12F635    ST7LITE02Y0    TP4301B    TP4303    RQ1A060ZP    RW1C015UN    QS8J2    RW1C020UN    RQ1A070ZP   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)