SMAJ17A-13-F

Transient Voltage Suppressor Features:         Optimized for LAN Protection Applications Low Profile Package With Built-In Strain Relief For Surface Mounted Applications Low Incremental Surge Resistance, Excellent Clamping Capability 400W Peak Pulse Power Capability with a 10/1,000µs Wave Form,  Repetition Rate (duty cycle): 0.01% (300W above 78V)   Very Fast Response Time   High Temperature Soldering Guaranteed : 260°C/10 seconds at Terminals Mechanical Data   Case : JEDEC DO-214AC molded plastic over passivated chip   Terminals : solder plated, solderable per MIL-STD-750, method 2026    Polarity : forint-directional types the colour band denotes the cathode, which is positive with respect to the anode under normal TVS operation   Mounting position: any Weight : 0.002oz, 0.064g Devices for Bidirectional Applications For Bi-directional devices, use suffix C or CA (e.g. SMAJ10C, SMAJ10CA). Electrical characteristics apply in both directions. Maximum Ratings and Thermal Characteristics (TA=25°C unless otherwise noted) Characteristic Peak power dissipation with a 10/1,000μs waveform (Note 1,2, Fig.1) Peak pulse current with a 10/1,000μs waveform (Note 1) Typical thermal resistance, junction to ambient (Note 3) Peak forward surge current, 8.3ms single half sine-wave uni-directional only (Note 2) Typical thermal resistance, junction to ambient (Note 3) Operating junction and storage temperature range Symbol PPPM IPPM RθJA IFSM RθJL TJ, TSTG Value Min. 400 See Next ...