SMB10J5.0(C)A THRU SMB10J120(C)A
E480232
Features
• Glass Passivated Chip • 1000W Peak Pulse Power Capability with a 1...
SMB10J5.0(C)A THRU SMB10J120(C)A
E480232
Features
Glass Passivated Chip 1000W Peak Pulse Power Capability with a 10/1000 us Waveform,
Repetitive Rate(dutycycle):0.01% Low Inductance For Bidirectional Devices Add “C” To The Suffix of The Part Number: i.e.SMB10J5.0CA for 5% Tolerance Halogen Free Available Upon Request By Adding Suffix "-HF" Moisture Sensitivity Level 1 Epoxy Meets UL 94 V-0 Flammability Rating Lead Free Finish/RoHS Compliant (Note1) ("P" Suffix Designates
RoHS Compliant. See Ordering Information)
Mechanical Data
Terminals: Solderable Per MIL-STD-750, Method 2026 Polarity: Color Band Denotes Positive End (cathode) Except
Bidirectiona
Maximum Ratings
Operating Junction Temperature Range: -55°C to +150°C Storage Temperature Range: -55°C to +150°C
Electrical Characteristics @ 25°C Unless Otherwise Specified
Peak Pulse Power
Surge Current on
IPP
10/1000μs Waveform
See the Table Note 2
Peak Pulse Power Dissipation
PPP
1000W
Note 2
Power Dissipationon infinite heat sink
PD
5.0W
TL = 75°C
Peak forward surge current
IFSM
100A
Note 3
Maximum
instantaneous forward
voltage at 25A for
VF
unidirectional only
3.5V/5.0V Note 4
Notes:
1. High Temperature Solder Exemption Applied, see EU Directive Annex 7a. 2. Non-repetitive current pulse, per Fig.3 and derated above TA=25 °C per Fig.4 3. Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle =
4 pulses per minute maximum 4. VF <3.5V for devices of VBR<5...