DatasheetsPDF.com

SMDA05 Datasheet

TVS

SMDA05 THRU SMDA24 Unidirectional TVS Array for Protection of Four Lines PROTECTION PRODUCTS Description The SMDAxx series of TVS arrays are designed to provide undirectional protection for sensitive electronics from damage or latch-up due to ESD, lightning and other voltage-induced transient events. Each device will protect four data or I/O lines..


Semtech Corporation
SMDA05.pdf

Preview
Preview

Preview

Semtech Corporation SMDA05 Datasheet

SMDA05 THRU SMDA24 Unidirectional TVS Array for Protection of Four Lines PROTECTION PRODUCTS Description The SMDAxx series of TVS arrays are designed to provide undirectional protection for sensitive electronics from damage or latch-up due to ESD, lightning and other voltage-induced transient events. Each device will protect four data or I/O lines. They are available with operating voltages of 5V, 12V, 15V and 24V. TVS diodes are solid-state devices designed specifically for transient suppression. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage and no device degradation. The low profile SO-8 package allows the user to protect up to four independent lines with one package. The SMDAxx series is suitable protection for sensitive semiconductors components such as microprocessors, ASICs, transceivers, transducers, and CMOS memory. The SMDAxx series devices may be used to meet the ESD immunity requirements of IE.






MCC   omponents 21201 Itasca Street Chatsworth    !"# $ %    !"# SMDA/B03 THRU SMDA/B24C TVSarray™ Series DESCRIPTION (300 and 500 watt) This 8 pin 4 line Unidirectional or Bidirectional array is designed for use in applications where protection is required at the board level from voltage tra.


Micro Commercial Components
SMDA05.pdf

Preview
Preview


Preview

Micro Commercial Components SMDA05 Datasheet

MCC   omponents 21201 Itasca Street Chatsworth    !"# $ %    !"# SMDA/B03 THRU SMDA/B24C TVSarray™ Series DESCRIPTION (300 and 500 watt) This 8 pin 4 line Unidirectional or Bidirectional array is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge (ESD) as defined by IEC 1000-4-2, electrical fast transients (EFT) per IEC 1000-4-4 and effects of secondary lighting. These arrays are used to protect any combination of 4 lines. The SMDA/B product provides board level protection from static electricity and other induced voltage surges that can damage sensitive circuitry. These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays protect 3.0/3.3 Volt components such as DRAM’s, SRAM’s, CMOS, HCMOS, HSIC, and low voltage interfaces up to 24Volts. FEATURES • • • • Protects 3.0/3.3 up through 24V Components Protects 4 lines Unidirectional or Bidirectional Pr.






SCOTTSDALE DIVISION SMDA03 thru SMDA24C, e3 and SMDB03 thru SMDB24C, e3 4 LINE TVSarray ™ WWW.Microsemi .COM DESCRIPTION This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is packaged in an SO-8 configuration giving protection to 4 unidirectional or bi-directional data or interface lines. It is designed for use in applications where protection is req.


Microsemi
SMDA05.pdf

Preview
Preview


Preview

Microsemi SMDA05 Datasheet

SCOTTSDALE DIVISION SMDA03 thru SMDA24C, e3 and SMDB03 thru SMDB24C, e3 4 LINE TVSarray ™ WWW.Microsemi .COM DESCRIPTION This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is packaged in an SO-8 configuration giving protection to 4 unidirectional or bi-directional data or interface lines. It is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge (ESD) as defined in IEC 61000-4-2, electrical fast transients (EFT) per IEC 61000-4-4 and effects of secondary lightning. These TVS arrays have peak pulse power ratings of 300 watts (SMDA) and 500 watts (SMDB) for an 8/20 µsec pulse. They are suitable for protection of sensitive circuitry consisting of TTL, CMOS, DRAM’s, SRAM’s, HCMOS, HSIC and low-voltage interfaces from 3.3 volts to 24 volts IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com APPEARANCE FEATURES • Protects 3.0/3.3 volt up to 24 volt compone.








 

@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)