DatasheetsPDF.com

SMDJ150A Datasheet

Surface Mount Transient Voltage Suppressors (TVS) SMDJ Series 5.0 To 440 V 3000W Description The SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u For surface mounted applications in order to optimize board s.

SOCAY
SMDJ150A.pdf

Preview

Preview
SOCAY

Preview

SMDJ150A Datasheet
Surface Mount Transient Voltage Suppressors (TVS) SMDJ Series 5.0 To 440 V 3000W Description The SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u For surface mounted applications in order to optimize board space u Low leakage u Uni and Bidirectional unit u Glass passivated junction u Low inductance u Excellent clamping capability u 3000W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical IR less than 5μA above 12V. u High Temperature soldering: 260°C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin lead–free Plated u Halogen free and RoHS compliant u Typical failure mode is short from over-specified voltage or current u Whisk.





SMDJ Series Surface Mount-3000W Transient Voltage Suppression Diodes Description The SMDJ Series are designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Unidirectional Bidirectional Feature Applications  For surface mounted applic.

Prisemi
SMDJ150A.pdf

Preview

Preview
Prisemi

Preview

SMDJ150A Datasheet
SMDJ Series Surface Mount-3000W Transient Voltage Suppression Diodes Description The SMDJ Series are designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Unidirectional Bidirectional Feature Applications  For surface mounted application to optimize board space  Low profile package  Built-in strain relief  Typical maximum temperature coefficient TVS device are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer industrial and consumer electronic application ᇞVBR=0.1%×VBR@25℃×ᇞT  Glass passivated chip junction  3000W peak pulse power capability at 10×1000μs waveform, repetition rate(duty cycles):0.01%  Fast response time: typically less than 1.0ps from 0V to VR min  Excellent clamping capability  Low incremental surge resistance SMDJ/DO-214AB  High temperature soldering guaranteed:260℃/4.





SMDJ5.0 THRU SMDJ170CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Stand - Off Voltage - 5.0 to 170 Volts Peak Pulse Power - 3000 Watt FEATURES ● Glass Passivated Die Construction ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classifi.

KD
SMDJ150A.pdf

Preview

Preview
KD

Preview

SMDJ150A Datasheet
SMDJ5.0 THRU SMDJ170CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Stand - Off Voltage - 5.0 to 170 Volts Peak Pulse Power - 3000 Watt FEATURES ● Glass Passivated Die Construction ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classification Rating 94V-O MECHANICAL DATA ● Case: SMC/DO-214AB, Molded Plastic ● Terminals: Solder Plated, Solderable per MIL-STD-750, Method 2026 ● Polarity: Cathode Band Except Bi-Directional ● Marking: Device Code ● Weight: 0.21 grams (approx.) SMC ( DO-214AB ) .128(3.25) .108(2.75) .245(6.22) .220(5.59) .280(7.11) .260(6.60) .103(2.62) .079(2.00) .012(.305) .006(.152) .060(1.52) .030(0.76) .320(8.13) .305(7.75) .008(.203) .002(.051) Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Characteristic Peak Pulse Power Dissipation 10/1000µS Waveform (Note 1, 2) Figure 3 Peak Pulse Current on 10/1000µS Waveform (Note 1) Figure 4 Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) (Note 2, 3) Operating and Storage Temperature Range Symbol PPPM IPPM IFSM Tj, TSTG Value 3000 Minimum See Table 1 300 -55 to +150 Unit W A A °C Note: 1. Non-repetitive current pulse per Figure 4 and derated above TA = 25°C per Figure 1. 2. Mounted on 5.0mm2 (0.013mm thick) land area. 3. Measured on 8.3ms single half sine-wave or equivalent square wave, dut.





Surface Mount Transient Voltage Suppressors

Surface Mount Transient Voltage Suppressors (TVS) SMDJ Series 5.0 To 440 V 3000W Description The SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u For surface mounted applications in order to optimize board space u Low leakage u Uni and Bidirectional unit u Glass passivated junction u Low inductance u Excellent clamping capability u 3000W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical IR less than 5μA above 12V. u High Temperature soldering: 260°C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin lead–free Plated u Halogen free and RoHS compliant u Typical failure mode is short from over-specified voltage or current u Whisk.



2017-11-30 : 10A4    10A6    10A6    10A8    10A10    10A1    10A2    10A4    10A8    10A10   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)