SN55LBC175 QUADRUPLE LOW-POWER DIFFERENTIAL LINE RECEIVER
D Meets EIA Standards RS-422-A, RS-423-A,
RS-485, and CCITT V...
SN55LBC175 QUADRUPLE LOW-POWER DIFFERENTIAL LINE RECEIVER
D Meets EIA Standards RS-422-A, RS-423-A,
RS-485, and CCITT V.11
D Designed to Operate With Pulse Durations
as Short as 20 ns
D Designed for Multipoint Transmission on
Long Bus Lines in Noisy Environments
D Input Sensitivity . . . ± 200 mV D Low-Power Consumption . . . 20 mA Max D Open-Circuit Fail-Safe Design D Common-Mode Input
Voltage Range of
– 7 V to 12 V
SGLS083A – MARCH 1995 – REVISED JUNE 2000
J OR W PACKAGE (TOP VIEW)
1B 1 1A 2 1Y 3 1, 2EN 4 2Y 5 2A 6 2B 7 GND 8
16 VCC 15 4B 14 4A 13 4Y 12 3, 4EN 11 3Y 10 3A 9 3B
description
The SN55LBC175 is a monolithic quadruple differential line receiver with 3-state outputs and is designed to meet the requirements of the EIA Standards RS-422-A, RS-423-A, RS-485, and CCITT V.11. This device is optimized for balanced multipoint bus transmission at data rates up to and exceeding 10 million bits per second. The receivers are enabled in pairs with an active-high enable input. Each differential receiver input features high impedance, hysteresis for increased noise immunity, and sensitivity of ± 200 mV over a common-mode input
voltage range of 12 V to –7 V. Fail-safe design ensures that if the inputs are open-circuited, the outputs are always high. This device is designed using the Texas Instruments proprietary LinBi
CMOS™ technology allowing low power consumption, high switching speeds, and robustness.
FK PACKAGE (TOP VIEW)
1A 1B NC VCC 4B
3 2 1 20 19
1Y 4
18 4A
1, 2E...