SN55LVDS31-SP
www.ti.com
SLLSEB5 – MARCH 2012
HIGH-SPEED DIFFERENTIAL LINE DRIVER
Check for Samples: SN55LVDS31-SP
F...
SN55LVDS31-SP
www.ti.com
SLLSEB5 – MARCH 2012
HIGH-SPEED DIFFERENTIAL LINE DRIVER
Check for Samples: SN55LVDS31-SP
FEATURES
1
QML-V Qualified, SMD 5962-97621 Meet or Exceed the Requirements of ANSI
TIA/EIA-644 Standard Low-
Voltage Differential Signaling With Typical
Output
Voltage of 350 mV and 100-Ω Load Typical Output
Voltage Rise and Fall Times of
500 ps (400 Mbps) Typical Propagation Delay Times of 1.7 ns Operate From a Single 3.3-V Supply Power Dissipation 25 mW Typical Per Driver at
200 MHz Driver at High Impedance When Disabled or
With VCC = 0 Bus-Terminal ESD Protection Exceeds 8 kV Low-
Voltage TTL (LVTTL) Logic Input Levels
Cold Sparing for Space and High Reliability Applications Requiring Redundancy
J OR W PACKAGE (TOP VIEW)
1A 1 1Y 2 1Z 3 G4 2Z 5 2Y 6 2A 7 GND 8
16 VCC 15 4A 14 4Y 13 4Z 12 G 11 3Z 10 3Y 9 3A
DESCRIPTION
The SN55LVDS31 is a differential line driver that implements the electrical characteristics of low-
voltage differential signaling (LVDS). This signaling technique lowers the output
voltage levels of 5-V differential standard levels (such as TIA/EIA-422B) to reduce the power, increase the switching speeds, and allow operation with a 3.3-V supply rail. This driver will deliver a minimum differential output
voltage magnitude of 247 mV into a 100-Ω load when enabled.
The intended application of this device and signaling technique is both point-to-point and multidrop (one driver and multiple receivers) data transmission ove...