DatasheetsPDF.com

SN74AUC32245 Datasheet

Part Number SN74AUC32245
Manufacturers Texas Instruments
Logo Texas Instruments
Description 32-BIT BUS TRANSCEIVER
Datasheet SN74AUC32245 DatasheetSN74AUC32245 Datasheet (PDF)

www.ti.com FEATURES • Member of the Texas Instruments Widebus+™ Family • Optimized for 1.8-V Operation and Is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation • Ioff Supports Partial-Power-Down Mode Operation • Sub-1-V Operable SN74AUC32245 32-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS SCES410C – AUGUST 2002 – REVISED MARCH 2005 • Max tpd of 2 ns at 1.8 V • Low Power Consumption, 40-µA Max ICC • ±8-mA Output Drive at 1.8 V • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II • ESD.

  SN74AUC32245   SN74AUC32245






Part Number SN74AUC32244
Manufacturers Texas Instruments
Logo Texas Instruments
Description 32-BIT BUFFER/DRIVER
Datasheet SN74AUC32245 DatasheetSN74AUC32244 Datasheet (PDF)

SN74AUC32244 32ĆBIT BUFFER/DRIVER WITH 3ĆSTATE OUTPUTS SCES425 − FEBRUARY 2003 D Member of the Texas Instruments Widebus+ Family D Optimized for 1.8-V Operation and is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation D Ioff Supports Partial-Power-Down Mode Operation D Sub 1-V Operable D Max tpd of 1.8 ns at 1.8 V D Low Power Consumption, 40-µA Max ICC D ±8-mA Output Drive at 1.8 V D Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II D ESD Protection Exceeds JESD 22 − 2000-V Hu.

  SN74AUC32245   SN74AUC32245







32-BIT BUS TRANSCEIVER

www.ti.com FEATURES • Member of the Texas Instruments Widebus+™ Family • Optimized for 1.8-V Operation and Is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation • Ioff Supports Partial-Power-Down Mode Operation • Sub-1-V Operable SN74AUC32245 32-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS SCES410C – AUGUST 2002 – REVISED MARCH 2005 • Max tpd of 2 ns at 1.8 V • Low Power Consumption, 40-µA Max ICC • ±8-mA Output Drive at 1.8 V • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II • ESD Protection Exceeds JESD 22 – 2000-V Human-Body Model (A114-A) – 200-V Machine Model (A115-A) – 1000-V Charged-Device Model (C101) DESCRIPTION/ORDERING INFORMATION This 32-bit noninverting bus transceiver is operational at 0.8-V to 2.7-V VCC, but is designed specifically for 1.65-V to 1.95-V VCC operation. The SN74AUC32245 is designed for asynchronous communication between data buses. The control-function implementation minimizes external timing requirements. This device can be used as four 8-bit transceivers, two 16-bit transceivers, or one 32-bit transceiver. It allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by .


2021-08-31 : SN74AUC1G240    SN74AUC1G32    SN74AUC1G66    SN74AUC1G79    SN74AUC1G74    SN74AUC34    SN74AUC1G80    SN74AUC1G86    SN74AUC1GU04    SN74AUC125   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)