DatasheetsPDF.com

SN74LV541AT Datasheet

Part Number SN74LV541AT
Manufacturers Texas Instruments
Logo Texas Instruments
Description OCTAL BUFFER/DRIVER
Datasheet SN74LV541AT DatasheetSN74LV541AT Datasheet (PDF)

SN74LV541AT www.ti.com SCES573B – JUNE 2004 – REVISED JULY 2013 OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS Check for Samples: SN74LV541AT FEATURES 1 • Inputs Are TTL-Voltage Compatible • 4.5-V to 5.5-V VCC Operation • Typical tpd of 4 ns at 5 V • Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 5 V, TA = 25°C • Typical VOHV (Output VOH Undershoot) >2.3 V at VCC = 5 V, TA = 25°C • Supports Mixed-Mode Voltage Operation on All Ports • Ioff Supports Partial-Power-Down Mode Operation • Latch-Up .

  SN74LV541AT   SN74LV541AT






Part Number SN74LV541A
Manufacturers Texas Instruments
Logo Texas Instruments
Description Octal Buffers/Drivers
Datasheet SN74LV541AT DatasheetSN74LV541A Datasheet (PDF)

Product Folder Sample & Buy Technical Documents Tools & Software Support & Community SN74LV541A SCLS410J – APRIL 1998 – REVISED DECEMBER 2014 SN74LV541A Octal Buffers/Drivers With 3-State Outputs 1 Features •1 2-V to 5.5-V VCC Operation • Max tpd of 6 ns at 5 V • Typical VOLP (Output Ground Bounce) < 0.8 V at VCC = 3.3 V, TA = 25°C • Typical VOHV (Output VOH Undershoot) > 2.3 V at VCC = 3.3 V, TA = 25°C • Support Mixed-Mode Voltage Operation on All Ports • Ioff Supports Partial-Power-Down .

  SN74LV541AT   SN74LV541AT







OCTAL BUFFER/DRIVER

SN74LV541AT www.ti.com SCES573B – JUNE 2004 – REVISED JULY 2013 OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS Check for Samples: SN74LV541AT FEATURES 1 • Inputs Are TTL-Voltage Compatible • 4.5-V to 5.5-V VCC Operation • Typical tpd of 4 ns at 5 V • Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 5 V, TA = 25°C • Typical VOHV (Output VOH Undershoot) >2.3 V at VCC = 5 V, TA = 25°C • Supports Mixed-Mode Voltage Operation on All Ports • Ioff Supports Partial-Power-Down Mode Operation • Latch-Up Performance Exceeds 250 mA Per JESD 17 • ESD Protection Exceeds JESD 22 – 2000-V Human-Body Model (A114-A) – 200-V Machine Model (A115-A) – 1000-V Charged-Device Model (C101) DESCRIPTION The SN74LV541AT is designed for 4.5-V to 5.5-V VCC operation. The inputs are TTL-voltage compatible, which allows them to be interfaced with bipolar outputs and 3.3-V devices. The device also can be used to translate from 3.3 V to 5 V. This device is ideal for driving bus lines or buffer memory address registers. It features inputs and outputs on opposite sides of the package to facilitate printed circuit board layout. The 3-state control gate is a two-input AND gate with active-low inputs so that, if either output-enable (OE1 or OE2) input is high, all corresponding outputs are in the high-impedance state. The outputs provide noninverted data when they are not in the highimpedance state. To ensure the high-impedance state during power up or power down, OE shall be tied to VCC through a pullup resisto.


2020-05-07 : IDT74LVC162245A    SPC560P60L5    MSP432P411Y    MSP432P411V    MSP432P4111    MSP430F249-EP    MSP430F2618-EP    MSP432P401R    MSP432P401M    MSP432P4011   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)