®
SP4403
Low Voltage Electroluminescent Lamp Driver
s +2.2V to +4.5V Battery Operation s DC-to-AC Converter Produces U...
®
SP4403
Low
Voltage Electroluminescent Lamp Driver
s +2.2V to +4.5V Battery Operation s DC-to-AC Converter Produces Up To 220VPP for EL Display Panels s Single Resistor Controlled Internal Oscillator s Low Current Standby Mode s Features High Efficiency Super Driver Architecture Uses Small 470µH Coil APPLICATIONS s Pagers s Cellular Phones s PDAs
DESCRIPTION The SP4403 is a high
voltage output DC-AC inverter specifically designed to drive electroluminescent lamps to backlight liquid crystal displays, keypads, and backlit readouts used in battery operated portable equipment. The SP4403 will operate from a +2.2V to +4.5V battery source. The device features a low power shutdown mode which draws less than 100nA (typical), ideal for low power portable products. One external inductor is required to generate the high
voltage AC output. One external resistor is used to select the internal oscillator frequency. The SP4403 is ideal for portable applications such as cellular phones, PDAs, and other portable applications using LCDs in dim or low light environments. The SP4403 is offered in 8 pin µSOIC packages.
VBATT
ELEN 1 VSS 2 COIL 3 EL1 4 SP4403
8 ROSC 7 CINT 6 5 VDD EL2
C1 0.1µF
ELEN
1
L1 470µH
SP4403
VDD ROSC 450kΩ 6 3 COIL D1 1N4148*
ROSC
8
7
CINT
C2 10nF
2 VSS
4 EL1
5 EL2
CINT 1800pF *
EL Lamp
*optional device
SP4403DS/05
SP4403 Electroluminescent Lamp Driver
© Copyright 2000 Sipex Corporation
1
ABSOLUTE MAXIMUM RATINGS
These are stress ratings only ...