SP50001

China Electronics Technology Group Corporation No.26 Research Institute 500MHz Low-loss SAW Filter www.DataSheet4U.com 45MHz Bandwidth Part Number: SP50001 www.sipatsaw.com SIPAT Co., Ltd. Specifications Parameter Center Frequency Insertion Loss(f0±20MHz) 1.5 dB Bandwidth 3 dB Bandwidth 35 dB Bandwidth Passband Variation(f0±20MHz) Absolute Delay Group Delay Variation(f0±20MHz) 100～470MHz Ultimate Rejection 530～550MHz 550～1000MHz Material Temperature coefficient Ambient Temperature Package Size Unit MHz dB MHz MHz MHz dB usec Minimum 40 45 30 30 30 Typical 500 21 46.4 48.34 60.94 1.1 0.66 25 26 18 33 -47 25 SMD7.0*5.0 Maximum 24 60 1.5 150 - nsec dB dB dB KHz/°C °C Notes: 1. All specifications are based on the test circuit shown 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. This is the optimum impedance in order to achieve the performance show Matching Configuration Source/Load Impedance=50 ohm INPUT 50Ω OUTPUT 50Ω Notes - Component values may change depending on board layout. SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Ver. SP50001 2007-05-06 1.0 Page 1/4 Phone: +86-23-62808818 Fax: +86-23-62805284 www.sipatsaw.com / [email protected] China Electr...