Solved by
TM
Wide Input Voltage Range 3Amp 900kHz Buck Regulator
SP7651
FEATURES • 2.5V to 20V Step Down Achieved Usin...
Solved by
TM
Wide Input
Voltage Range 3Amp 900kHz Buck Regulator
SP7651
FEATURES 2.5V to 20V Step Down Achieved Using Dual Input
Output
Voltage down to 0.8V
SP7651 DFN PACKAGE
7mm x 4mm
3A Output Capability (Up to 5A with Air Flow) Built in Low RDSON Power FETs (40 mΩ typ) Highly Integrated Design, Minimal Components 900 kHz Fixed Frequency Operation UVLO Detects Both VCC and VIN Over Temperature Protection Short Circuit Protection with Auto-Restart
LX 26 LX 25 LX 24 LX 23 VCC 22 GND 21 GND 20
BOTTOM VIEW Heatsink Pad 1 Connect to Lx
Pin 27
Heatsink Pad 2 Connect to GND
1 PGND 2 PGND 3 PGND 4 GND 5 VFB 6 COMP 7 UVIN
Wide BW Amp Allows Type II or III Compensation
GND 19
Pin 28
8 GND
Programmable Soft Start
BST 18
9 SS
Fast Transient Response High Efficiency: Greater than 92% Possible Asynchronous Start-Up into a Pre-Charged Output Small 7mm x 4mm DFN Package
NC 17 LX 16 LX 15 LX 14
Heatsink Pad 3 Connect to VIN
Pin 29
10 VIN 11 VIN 12 VIN 13 VIN
U.S. Patent #6,922,041
DESCRIPTION
The SP7651 is a high
voltage synchronous step-down switching regulator optimized for high efficiency. The part is designed to be especially attractive for dual supply, 12V step down with 5V used to power the controller. This lower VCC
voltage minimizes power dissipation in the part. The SP7651 is designed to provide a fully integrated buck regulator solution using a fixed 900kHz frequency, PWM
voltage mode architecture. Protection features include U...