Digital Audio USB Controller
SPCA514A
Digital Audio USB Controller 1. General description
The chip provides a built-in 8051 CPU with USB interface to...
Description
SPCA514A
Digital Audio USB Controller 1. General description
The chip provides a built-in 8051 CPU with USB interface to handle three types of flash memory: NAND-type, SPI and NextFlash. It can co-operate with Digital Audio processing chip to manage the flash memory and to communicate with the PC.
2. Feature
! ! ! ! ! ! ! ! Build-in 8032 micro-controller and 1K bytes Data RAM Support USB bus with built-in transceiver Four USB pipes supported, including default control pipe, bulk-in pipe, bulk-out pipe and interrupt pipe Support 2M / 4M / 8M x 8 bit NAND-type Flash memory Hardware generated ECC code for flash memory access Support SPI and NextFlash serial interface Support SPCA751 interface 100-pin LQFP
SPCA514A 3. Function description 3.1. block diagram
USB and Flash meory Controller with 8051
xp0[7:0]
xp1[7:0]
xp2[7:0]
Control Signals xsgpio[7:0]
xp3[7:0]
xpsenn
xale
Control Signals
SPI Controller
Status Signals Data Bus Data Bus
8051 CPU
Status Signals Data Bus Data Bus
751 Interface
xmgpio[7:0]
Control Signals
Address Bus
cpuintnn
CPU Data Bus
xdp xdm
Control Signals Control Signals Status Signals Status Signals
FM Controller
xngpio[7:0]
Flash Memory (NAND Type)
USB Controller
Data Bus xugpio[7:0] Data Bus
FIFO Controller
Control Signals
Control Signals
Data Bus
Data Bus
Data Bus
xegpio[7:0] xtalout xtalin xprstnn VCC (8) GND (8)
Data Bus
A Buffer (512x8)
B Buffer (512x8)
use...
Similar Datasheet