SPMB250-A1

www.DataSheet4U.com SPMB250-A1 MOTIONBEE™ family acceleration sensor Preliminary Data Features ■ ■ ■ ■ ■ Ready-to-use IEEE 802.15.4 compliant wireless acceleration sensor Integrated three axis MEMS-based linear accelerometer Antenna on board No external components required excluding power supplier Possibility to be programmed via SIF connector with EMZNET ZigBee® protocol stack and custom applications Board fixing with screws or pads for SMD soldering Reset and commissioning push buttons externally available Power connector and power switch externally available Two LEDs externally available for connection check and debugging Board dimensions: 49 x 27 x 5 mm CE / FCC compliant ■ ■ ■ ■ ■ ■ The ZigBee® module contains the SN250 SoC integrating a fully compliant 802.15.4 radio together with a microcontroller that can be used to elaborate sensor data and networking functionalities. SN250 can be programmed to run the EMZNET ZigBee® protocol stack from Ember Corporation. The module is programmable thanks to the SIF connector available on the SPZB250 module. The LIS3LV02DL three axis accelerometer is a low power low voltage linear accelerometer with digital output that can operate in the user selectable range +/-2 g or +/-6 g and with programmable data rate. The controller inside SPZB250 module handles all the networking functions and it can be used to implement custom procedures to elaborate and send data collected by the acceleration sensor. The board is ready-to-use, requirin...