SST45LF010

1 Megabit Serial Flash SST45LF010 SST45LF0101Mb Serial Architecture Interface flash memory Data Sheet FEATURES: Single 3.0-3.6V Read and Write Operations Serial Interface Architecture Byte Serial Read with Single Command Superior Reliability – Endurance: 100,000 Cycles (typical) – Greater than 100 years Data Retention Low Power Consumption – Active Current: 10 mA (typical) – Standby Current: 10 µA (typical) Sector or Chip-Erase Capability – Uniform 4 KByte sectors Fast Erase and Byte-Program – Chip-Erase Time: 70 ms (typical) – Sector-Erase Time: 18 ms (typical) – Byte-Program Time: 14 µs (typical) Automatic Write Timing – Internal VPP Generation End-of-Write Detection – Software Status 10 MHz Max Clock Frequency Hardware Reset Pin (RST#) – Resets the device to Standby Mode CMOS I/O Compatibility Hardware Data Protection (WP#) – Protects and unprotects the device from Write operation Packages Available – 8-lead SOIC (4.9mm x 6mm) – 8-contact WSON PRODUCT DESCRIPTION The SST45LF010 is a 1 Mbit serial flash memory manufacwww.DataSheet4U.com tured with SST’s proprietary, high performance CMOS SuperFlash technology. The 1 Mbit of memory is organized as 32 sectors of 4096 Bytes. The flash memory uses a 3wire serial interface and a chip enable to select and sequentially access its data. The serial interface consists of; serial data input (SI), serial data output (SO), serial clock (SCK), and chip enable (CE#). A write protect (WP#) inhibits the entire...