ST2349
4-bit dual supply level translator without direction control pin
Features
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
45 Mbps (max) da...
ST2349
4-bit dual supply level translator without direction control pin
Features
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
45 Mbps (max) data rate when driven by a totem pole driver 4 Mbps (max) data rate when driven by an open drain pole driver Bi-directional level translation without direction control pin Wide VL
voltage range of 1.65 to 3.6 V Wide VCC
voltage range of 1.80 to 5.5 V Power down mode feature – when either supply is off, all I/Os are in high impedance Low quiescent current (max 24 µA) Able to be driven by totem pole and open drain drivers 5.5 V tolerant enable pin ESD performance on all pins: ±2 kV HBM Small package and footprint QFN16 (2.6 x 1.8 mm) package QFN16L (2.6 x 1.8 mm)
Description
The ST2349 is a 4-bit dual supply level translator which provides the level shifting capability to allow data transfer in a multi-
voltage system. Externally applied
voltages, VCC and VL, set the logic levels on either side of the device. It utilizes transmission gate-based design that allows bidirectional level translation without a control pin.
http://www.DataSheet4U.net/
Applications
■ ■ ■ ■
Low
voltage system level translation Mobile phones and other mobile devices I2C level translation UART level translation
The ST2349 accepts a VL from 1.65 to 3.6 V and VCC from 1.80 to 5.5 V, making it ideal for data transfer between low-
voltage ASICs/PLD and higher
voltage systems. This device has a tri-state output mode which can be used to disable all I/Os. The ST2349 supports power down mode w...