DatasheetsPDF.com

ST2378E Datasheet

Part Number ST2378E
Manufacturers ST Microelectronics
Logo ST Microelectronics
Description 8-bit dual supply 1.71V to 5.5V level translator
Datasheet ST2378E DatasheetST2378E Datasheet (PDF)

ST2378E 8-bit dual supply 1.71 V to 5.5 V level translator with I/O VCC ±15 kV ESD protection Datasheet - production data Flip-Chip20 TSSOP20 Features  High speed – tPD = 15 ns (max.) at TA = 85 °C – VL = 1.8 V – VCC = 5.5 V  Guaranteed data rate – 13 Mbps (1.8 V  VL  VCC  5.5 V)  Low power dissipation – ITS-VL = ITS-VCC = 1 A (max.) at TA = 85 °C – IQVL = 100 A (max.) at TA = 85 °C – IQCC = 10 A (max.) at TA = 85 °C  Output impedance – |IOHA| = 20 A (min.) at VL = 1.8 V; VCC = 5..

  ST2378E   ST2378E






8-bit dual supply 1.71V to 5.5V level translator

ST2378E 8-bit dual supply 1.71 V to 5.5 V level translator with I/O VCC ±15 kV ESD protection Datasheet - production data Flip-Chip20 TSSOP20 Features  High speed – tPD = 15 ns (max.) at TA = 85 °C – VL = 1.8 V – VCC = 5.5 V  Guaranteed data rate – 13 Mbps (1.8 V  VL  VCC  5.5 V)  Low power dissipation – ITS-VL = ITS-VCC = 1 A (max.) at TA = 85 °C – IQVL = 100 A (max.) at TA = 85 °C – IQCC = 10 A (max.) at TA = 85 °C  Output impedance – |IOHA| = 20 A (min.) at VL = 1.8 V; VCC = 5.5 V – IOLA = 1.0 A (min.) at VL = 1.8 V; VCC = 5.5 V  Bidirectional level translation  Totem pole and open drain driving for I2C communications  5 V tolerant on enable pin  Wide operating voltage range – VL (opr.) = 1.71 V to VCC – VCC (opr.) = 1.71 V to 5.5 V  ESD performance  HBM > 15 kV ESD protection on I/O VCC lines  Lead-free Flip-Chip and TSSOP package Description The ST2378E device is an 8-bit, dual supply, bidirectional level translator with ±15 kV ESD protection on I/Os at VCC side. It is designed to interface data transfer between low voltage ASICs/PLDs and higher voltage systems. Externally applied voltage, VCC and VL, set logic levels at both sides with the range specified as 1.71 V  VL  5.5 V and VL  VCC  5.5 V. For proper operation, VCC should be set higher than VL. Utilizing a transmission-gate-based design, this device allows bidirectional asynchronous data transfer, which means each channel is allowed to have either VCC to VL or VL to VCC data transfer di.


2005-08-06 : DM86LS62    K102P    K102    UPD7201A    TA8466AF    TA8464K    TA8463F    TA8462F    TA8461F    STK795   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)