ST6255C ST6265C ST6265B
8-bit MCUs with ADC, safe reset, auto-reload timer, EEPROM and SPI
Features ■ 3.0 to 6.0V suppl...
ST6255C ST6265C ST6265B
8-bit MCUs with ADC, safe reset, auto-reload timer, EEPROM and SPI
Features ■ 3.0 to 6.0V supply operating range ■ 8 MHz maximum clock frequency ■ -40 to +125°C operating temperature range ■ Run, Wait and Stop modes ■ 5 interrupt vectors ■ Look-up table capability in program memory ■ Data storage in program memory:
user selectable size ■ Data RAM: 128 bytes ■ Data EEPROM: 128 bytes (not in ST6255C) ■ User programmable options ■ 21 I/O pins, fully programmable as:
– Input with pull-up resistor
– Input without pull-up resistor
– Input with interrupt generation
– Open-drain or push-pull output
– Analog Input ■ 8 I/O lines can sink up to 30 mA to drive LEDs or
TRIACs directly
– 8-bit Timer/Counter with 7-bit programmable prescaler
■ 8-bit Auto-reload timer with 7-bit programmable prescaler (AR Timer)
■ Digital watchdog ■ Oscillator safe guard (not in ST6265B ROM
devices) ■ Low
voltage detector for safe reset (not in
ST6265B ROM devices) ■ 8-bit A/D converter with 13 analog inputs ■ 8-bit synchronous peripheral interface (SPI) ■ On-chip clock oscillator can be driven by quartz
crystal, ceramic resonator or RC network ■ User configurable power-on reset ■ One external non-maskable interrupt ■ ST626x-EMU2 Emulation and Development
System (connects to an MS-DOS PC via a parallel port)
PDIP28 PS028 SS0P28
CDIP28W
(See end of Datasheet for Ordering Information)
Table 1. Device summary
Partnumber
ST6255C ST6265C ST6265B
OTP/EPROM/ROM program memory
(Bytes) 3...