DatasheetsPDF.com

STK672-642A-E Datasheet

Part Number STK672-642A-E
Manufacturers Sanyo Semicon Device
Logo Sanyo Semicon Device
Description 2-phase Stepping Motor Driver
Datasheet STK672-642A-E DatasheetSTK672-642A-E Datasheet (PDF)

www.DataSheet.co.kr Ordering number : ENA1589A STK672-642A-E Overview Thick-Film Hybrid IC 2-phase Stepping Motor Driver The STK672-642A-E is a hybrid IC for use as a unipolar, 2-phase stepping motor driver with PWM current control. Applications • Office photocopiers, printers, etc. Features • Built-in overcurrent detection function (output current OFF). • Built-in overheat detection function (output current OFF). • If either over-current or overheat detection function is activated, the F.

  STK672-642A-E   STK672-642A-E






Part Number STK672-642A-E
Manufacturers ON Semiconductor
Logo ON Semiconductor
Description 2-phase Stepping Motor Driver
Datasheet STK672-642A-E DatasheetSTK672-642A-E Datasheet (PDF)

Ordering number : ENA1589A STK672-642A-E Thick-Film Hybrid IC 2-phase Stepping Motor Driver http://onsemi.com Overview The STK672-642A-E is a hybrid IC for use as a unipolar, 2-phase stepping motor driver with PWM current control. Applications • Office photocopiers, printers, etc. Features • Built-in overcurrent detection function (output current OFF). • Built-in overheat detection function (output current OFF). • If either over-current or overheat detection function is activated, the FAULT s.

  STK672-642A-E   STK672-642A-E







2-phase Stepping Motor Driver

www.DataSheet.co.kr Ordering number : ENA1589A STK672-642A-E Overview Thick-Film Hybrid IC 2-phase Stepping Motor Driver The STK672-642A-E is a hybrid IC for use as a unipolar, 2-phase stepping motor driver with PWM current control. Applications • Office photocopiers, printers, etc. Features • Built-in overcurrent detection function (output current OFF). • Built-in overheat detection function (output current OFF). • If either over-current or overheat detection function is activated, the FAULT signal (active low) is output. • Built-in power on reset function. • The motor speed is controlled by the frequency of an external clock signal. • 2 phase or 1-2 phase excitation switching function. • Using either or both edges of the clock signal switching function. • Phase is maintained even when the excitation mode is switched. • Rotational direction switching function. • Supports schmitt input for 2.5V high level input. • Incorporating a current detection resistor (0.089Ω: resistor tolerance ±2%), motor current can be set using two external resistors. • The ENABLE pin can be used to cut output current while maintaining the excitation mode. • With a wide current setting range, power consumption can be reduced during standby. • No motor sound is generated during hold mode due to external excitation current control. • Miniature package (provides pin compatibility with STK672-640A-E) Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard .


2012-01-09 : BU104    BU111    BU112    BU113    BU134    BU323    BU433    BU522A    BU522    BU606   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)