Ordering number : ENA1136B
STK672-740A-E
Thick-Film Hybrid IC
2-phase Stepping Motor Driver
http://onsemi.com
Overvie...
Ordering number : ENA1136B
STK672-740A-E
Thick-Film Hybrid IC
2-phase Stepping Motor Driver
http://onsemi.com
Overview
The STK672-740A-E is a hybrid IC for use as a unipolar, 2-phase stepping motor driver with PWM current control.
Applications
Office photocopiers, printers, etc.
Features
Built-in overcurrent detection function (output current OFF). Built-in overheat detection function (output current OFF). If either overcurrent or overheat detection function is activated, the FAULT signal (active low) is output. Built-in power on reset function. Phase signal input driver activated with an active Low and incorporates a simultaneous ON prevention function. Supports schmitt input for 2.5V high level input. Incorporating a current detection resistor (0.089Ω: resistor tolerance ±2%), motor current can be set using two
external resistors. Provides the output current cutoff ENABLE pin.
Semiconductor Components Industries, LLC, 2013 June, 2013
70611HKPC 018-10-0049/21611HKIM/71608HKIM No. A1136-1/19
STK672-740A-E
Specifications
Absolute Maximum Ratings at Tc = 25°C
Parameter Maximum supply
voltage 1 Maximum supply
voltage 2 Input
voltage Output current 1 Output current 2 Output current 3 Allowable power dissipation 1 Allowable power dissipation 2 Operating substrate temperature Junction temperature Storage temperature
Symbol VCC max VDD max VIN max IOP max IOH max IOF max PdMF max
PdPK max
Tc max
Tj max Tstg
Conditions No signal No signal Logic input pins ...