STLC5445
QUAD LINE FEED CONTROLLER
s s s s s s s s s s s s s
BATTERY VOLTAGE UP TO 120V SUPPLIES POWER FOR UP TO FOUR D...
STLC5445
QUAD LINE FEED CONTROLLER
s s s s s s s s s s s s s
BATTERY
VOLTAGE UP TO 120V SUPPLIES POWER FOR UP TO FOUR DIGITAL TELEPHONE LINES PROGRAMMABLE CURRENT LIMITING LONGITUDINAL CURRENT CANCELLATION ETSI ETR80 COMPLIANT OUTPUT CURRENT UP TO 140 mA STATUS CONDITION DETECTION FOR EACH LINE AUTOMATIC THERMAL PROTECTION AUTO POWER ON SEQUENCE OUTPUT STAGE OPTIMIZED FOR MINIMAL OUTPUT OVER
VOLTAGE PROTECTION TWO EXTERNAL RELAY DRIVERS PER LINE PARALLEL OR MPI CONTROL INTERFACE HI-QUAD PACKAGE 64 PIN
HiQUAD-64 ORDERING NUMBER: STLC5445
by a pin strap. Each line can be individually powered and monitored: therefore overload and faults can easily be detected and localized even in a large system. The status conditions detected by the device are: Current Overload, Thermal Overload, Open Loop. If activated (by means of a dedicated pin strap), a self generated power on sequence avoids the thermal over stress when a simultaneous power on has been requested for more than one channel. The current limiting value can globally be programmed for the four channels by means of an external resistor. The device has two integrated relay drivers per line to drive the test relays of the ISDN system.
DESCRIPTION The QUAD LINE FEED CONTROLLER provides a power source for up to four U line interfaces. The power source to the device is a local battery or a centralized regulated power supply. Each powered line is individually controlled and monitored by the device interface. A MPI or a simple paral...