STM32C011x4/x6
Arm®Cortex®-M0+ 32-bit MCU, 32 KB flash, 6 KB RAM, 2 x USART, timers, ADC, comm. I/Fs, 2-3.6 V
Datasheet - production data
Features
• Includes ST state-of-the-art patented technology
• Core: Arm® 32-bit Cortex®-M0+ CPU, frequency up to 48 MHz
• -40°C to 85°C/105°C/125°C operating temperature
• Memories – Up to 32 Kbytes of flash memory with protection – 6 Kbytes of SRAM with hardware parity check
• CRC calculation unit • Reset and power management
– Voltage range: 2.0 V to 3.6 V.
32-bit MCU
STM32C011x4/x6
Arm®Cortex®-M0+ 32-bit MCU, 32 KB flash, 6 KB RAM, 2 x USART, timers, ADC, comm. I/Fs, 2-3.6 V
Datasheet - production data
Features
• Includes ST state-of-the-art patented technology
• Core: Arm® 32-bit Cortex®-M0+ CPU, frequency up to 48 MHz
• -40°C to 85°C/105°C/125°C operating temperature
• Memories – Up to 32 Kbytes of flash memory with protection – 6 Kbytes of SRAM with hardware parity check
• CRC calculation unit • Reset and power management
– Voltage range: 2.0 V to 3.6 V – Power-on / power-down reset (POR/PDR) – Programmable brownout reset (BOR) – Low-power modes:
Sleep, Stop, Standby, Shutdown
• Clock management – 4 to 48 MHz crystal oscillator – 32 kHz crystal oscillator with calibration – Internal 48 MHz RC oscillator (±1 %) – Internal 32 kHz RC oscillator (±5 %)
• Up to 18 fast I/Os – All mappable on external interrupt vectors – All 5 V-tolerant
• 3-channel DMA controller with flexible mapping • 12-bit, 0.4 µs ADC (up to 13 ext. channels)
– Conversion range: 0 to 3.6 V
• 8 timers: 16-bit for advanced motor control, four 16-bit general-purpose, two watchdogs, SysTick timer
• Calendar RTC with alarm
SO8N (4.9 × 6 mm)
WLCSP12 (1.70 × 1.42 mm)
TSSOP20 (6.4 × 4.4 mm)
UFQFPN20 (3 × 3 mm)
• Communication interfaces – One I2C-bus interface supporting Fastmode Plus (1 Mbit/s) with extra current sink; supporting SMBus/PMBus™ and wake-up from Stop mode – Two USARTs with master/slave synchronous SPI; one supporting ISO7816 interface, LIN, IrDA capability.