DatasheetsPDF.com

STM32F101CB Datasheet

Part Number STM32F101CB
Manufacturers STMicroelectronics
Logo STMicroelectronics
Description 32-bit MCU
Datasheet STM32F101CB DatasheetSTM32F101CB Datasheet (PDF)

STM32F101x8 STM32F101xB Medium-density access line, ARM®-based 32-bit MCU with 64 or 128 KB Flash, 6 timers, ADC and 7 communication interfaces Datasheet - production data Features  Core: ARM® 32-bit Cortex® -M3 CPU – 36 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access – Single-cycle multiplication and hardware division  Memories – 64 to 128 Kbytes of Flash memory – 10 to 16 Kbytes of SRAM  Clock, reset and supply management – 2.0 to 3.6 V appl.

  STM32F101CB   STM32F101CB






Part Number STM32F101C8
Manufacturers STMicroelectronics
Logo STMicroelectronics
Description 32-bit MCU
Datasheet STM32F101CB DatasheetSTM32F101C8 Datasheet (PDF)

STM32F101x8 STM32F101xB Medium-density access line, ARM®-based 32-bit MCU with 64 or 128 KB Flash, 6 timers, ADC and 7 communication interfaces Datasheet - production data Features  Core: ARM® 32-bit Cortex® -M3 CPU – 36 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access – Single-cycle multiplication and hardware division  Memories – 64 to 128 Kbytes of Flash memory – 10 to 16 Kbytes of SRAM  Clock, reset and supply management – 2.0 to 3.6 V appl.

  STM32F101CB   STM32F101CB







Part Number STM32F101C6
Manufacturers STMicroelectronics
Logo STMicroelectronics
Description 32 bit MCU
Datasheet STM32F101CB DatasheetSTM32F101C6 Datasheet (PDF)

STM32F101x4 STM32F101x6 Low-density access line, ARM®-based 32 bit MCU with 16 or 32 KB Flash, 5 timers, ADC and 4 communication interfaces Datasheet - production data Features • Core: ARM® 32-bit Cortex®-M3 CPU – 36 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access – Single-cycle multiplication and hardware division • Memories – 16 to 32 Kbytes of Flash memory – 4 to 6 Kbytes of SRAM • Clock, reset and supply management – 2.0 to 3.6 V application s.

  STM32F101CB   STM32F101CB







Part Number STM32F101C4
Manufacturers STMicroelectronics
Logo STMicroelectronics
Description 32 bit MCU
Datasheet STM32F101CB DatasheetSTM32F101C4 Datasheet (PDF)

STM32F101x4 STM32F101x6 Low-density access line, ARM®-based 32 bit MCU with 16 or 32 KB Flash, 5 timers, ADC and 4 communication interfaces Datasheet - production data Features • Core: ARM® 32-bit Cortex®-M3 CPU – 36 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access – Single-cycle multiplication and hardware division • Memories – 16 to 32 Kbytes of Flash memory – 4 to 6 Kbytes of SRAM • Clock, reset and supply management – 2.0 to 3.6 V application s.

  STM32F101CB   STM32F101CB







32-bit MCU

STM32F101x8 STM32F101xB Medium-density access line, ARM®-based 32-bit MCU with 64 or 128 KB Flash, 6 timers, ADC and 7 communication interfaces Datasheet - production data Features  Core: ARM® 32-bit Cortex® -M3 CPU – 36 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access – Single-cycle multiplication and hardware division  Memories – 64 to 128 Kbytes of Flash memory – 10 to 16 Kbytes of SRAM  Clock, reset and supply management – 2.0 to 3.6 V application supply and I/Os – POR, PDR and programmable voltage detector (PVD) – 4-to-16 MHz crystal oscillator – Internal 8 MHz factory-trimmed RC – Internal 40 kHz RC – PLL for CPU clock – 32 kHz oscillator for RTC with calibration  Low power – Sleep, Stop and Standby modes – VBAT supply for RTC and backup registers  Debug mode – Serial wire debug (SWD) and JTAG interfaces  DMA – 7-channel DMA controller – Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs  1 × 12-bit, 1 µs A/D converter (up to 16 channels) – Conversion range: 0 to 3.6 V – Temperature sensor  Up to 80 fast I/O ports LQFP100 14 x 14 mm LQFP64 10 x 10 mm LQFP48 7 x 7 mm UFQFPN48 7 × 7 mm VFQFPN36 6 × 6 mm – 26/37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant  Six timers – Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter – 2 watchdog timers (Independent and Window) – SysTick timer: 24-bit downcounter  Up to 7 communication interfaces – Up to 2 x I2.


2016-01-07 : KK74AC574    DP8405    DP8404    DP8402A    DP8403    M6020806    VC-TCXO-212C    TX-508    TX-500    TCXO-214C   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)