STM32F101x4 STM32F101x6
Low-density access line, ARM®-based 32 bit MCU with 16 or 32 KB Flash, 5 timers, ADC and 4 commu...
STM32F101x4 STM32F101x6
Low-density access line, ARM®-based 32 bit MCU with 16 or 32 KB Flash, 5 timers, ADC and 4 communication interfaces
Datasheet - production data
Features
Core: ARM® 32-bit Cortex®-M3 CPU – 36 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access – Single-cycle multiplication and hardware division
Memories – 16 to 32 Kbytes of Flash memory – 4 to 6 Kbytes of SRAM
Clock, reset and supply management – 2.0 to 3.6 V application supply and I/Os – POR, PDR and programmable
voltage detector (PVD) – 4-to-16 MHz crystal oscillator – Internal 8 MHz factory-trimmed RC – Internal 40 kHz RC – PLL for CPU clock – 32 kHz oscillator for RTC with calibration
Low power – Sleep, Stop and Standby modes – VBAT supply for RTC and backup registers
Debug mode – Serial wire debug (SWD) and JTAG interfaces
DMA – 7-channel DMA controller – Peripherals supported: timers, ADC, SPIs, I2Cs and ...