STM32F102x4 STM32F102x6
Low-density USB access line, Arm®-based 32-bit MCU with 16/32 KB Flash, USB FS, 5 timers, ADC an...
STM32F102x4 STM32F102x6
Low-density USB access line, Arm®-based 32-bit MCU with 16/32 KB Flash, USB FS, 5 timers, ADC and 5 com. interfaces
Datasheet - production data
Features
Core: Arm® 32-bit Cortex®-M3 CPU – 48 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 WS memory access – Single-cycle multiplication and hardware division
Memories – 16 or 32 Kbytes of Flash memory – 4 or 6 Kbytes of SRAM
Clock, reset and supply management – 2.0 to 3.6 V application supply and I/Os – POR, PDR and programmable
voltage detector (PVD) – 4 to 16 MHz crystal oscillator – Internal 8 MHz factory-trimmed RC – Internal 40 kHz RC – PLL for CPU clock – 32 kHz oscillator for RTC with calibration
Low power – Sleep, Stop and Standby modes – VBAT supply for RTC and backup registers
Debug mode – Serial wire debug (SWD) and JTAG interfaces
DMA – 7-channel DMA controller – Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs
1 × 12-bit, 1.2 µs A/D converter (up to 16 channels) – Conversion range: 0 to 3.6 V – Temperature sensor
Up to 51 fast I/O ports – 37/51 I/Os all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
LQFP48 7 × 7 mm
LQFP64 10 × 10 mm
Up to five timers – Two 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter – 2 watchdog timers (Independent and Window) – SysTick timer: 24-bit downcounter
Up to five communication interfaces – One I2C interface (SMBus/PMBus) – Two USARTs (ISO 7816 interface, LIN, IrDA capabili...