STM32F302R6

STM32F302x6 STM32F302x8 Arm® Cortex®-M4 32-bit MCU+FPU, up to 64 KB Flash, 16 KB SRAM, ADC, DAC, USB, CAN, COMP, Op-Amp, 2.0 - 3.6 V Datasheet - production data Features Core: Arm® 32-bit Cortex®-M4 CPU with FPU (72 MHz max.), single-cycle multiplication and HW division, DSP instruction Memories – 32 to 64 Kbytes of Flash memory – 16 Kbytes of SRAM on data bus CRC calculation unit Reset and power management – VDD, VDDA voltage range: 2.0 to 3.6 V – Power-on/Power down reset (POR/PDR) – Programmable voltage detector (PVD) – Low-power: Sleep, Stop, and Standby – VBAT supply for RTC and backup registers Clock management – 4 to 32 MHz crystal oscillator – 32 kHz oscillator for RTC with calibration – Internal 8 MHz RC with x 16 PLL option – Internal 40 kHz oscillator Up to 51 fast I/O ports, all mappable on external interrupt vectors, several 5 V-tolerant Interconnect matrix 7-channel DMA controller supporting timers, ADCs, SPIs, I2Cs, USARTs and DAC 1 × ADC 0.20 μs (up to 15 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, single ended/differential mode, separate analog supply from 2.0 to 3.6 V Temperature sensor 1 x 12-bit DAC channel with analog supply from 2.4 to 3.6 V Three fast rail-to-rail analog comparators with analog supply from 2.0 to 3.6 V 1 x operational amplifier that can be used in PGA mode, all terminal accessible with analog supply from 2.4 to 3.6 V LQFP48 (7x7 mm) LQFP64 (10x10 mm) UFQFPN32 (5x5 mm...