STM32F318C8 Datasheet
STM32F318C8 STM32F318K8
Arm®-based Cortex®-M4 32-bit MCU+FPU, 64 KB Flash, 16 KB SRAM, ADC, DAC, 3 COMP, Op-Amp, 1.8 V
Datasheet - production data
Features
• Core: Arm® 32-bit Cortex®-M4 CPU with FPU (72 MHz max.), single-cycle multiplication and HW division, DSP instruction
• Memories – 64 Kbytes of Flash memory – 16 Kbytes of SRAM on data bus
• CRC calculation unit
• Power management – Supply: VDD = 1.8 V ± 8% VDDA voltage range = 1.65 V to 3.6 V – External POR pin – Low-power: Sleep, Stop – VBAT supply for RTC and backup registers
• Clock management – 4 to 32 MHz crystal oscillator – 32 kHz oscillator for RTC with calibration – Internal 8 MHz RC with x 16 PLL option – Internal 40 kHz oscillator
• Up to 36 fast I/O ports, all mappable on external interrupt vectors, several 5 V-tolerant
• Interconnect matrix
• 7-channel DMA controller supporting timers, ADCs, SPIs, I2Cs, USARTs and DAC
• 1 × ADC 0.20 μs (up to 11 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V con.
32-bit MCU+FPU
STM32F318C8 STM32F318K8
Arm®-based Cortex®-M4 32-bit MCU+FPU, 64 KB Flash, 16 KB SRAM, ADC, DAC, 3 COMP, Op-Amp, 1.8 V
Datasheet - production data
Features
• Core: Arm® 32-bit Cortex®-M4 CPU with FPU (72 MHz max.), single-cycle multiplication and HW division, DSP instruction
• Memories – 64 Kbytes of Flash memory – 16 Kbytes of SRAM on data bus
• CRC calculation unit
• Power management – Supply: VDD = 1.8 V ± 8% VDDA voltage range = 1.65 V to 3.6 V – External POR pin – Low-power: Sleep, Stop – VBAT supply for RTC and backup registers
• Clock management – 4 to 32 MHz crystal oscillator – 32 kHz oscillator for RTC with calibration – Internal 8 MHz RC with x 16 PLL option – Internal 40 kHz oscillator
• Up to 36 fast I/O ports, all mappable on external interrupt vectors, several 5 V-tolerant
• Interconnect matrix
• 7-channel DMA controller supporting timers, ADCs, SPIs, I2Cs, USARTs and DAC
• 1 × ADC 0.20 μs (up to 11 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, single ended/differential mode, separate analog supply from 1.8 to 3.6 V
• Temperature sensor
• 1 x 12-bit DAC channel with analog supply from 2.4 to 3.6 V
• Three fast rail-to-rail analog comparators with analog supply from 1.8 to 3.6 V
• 1 x operational amplifier that can be used in PGA mode, all terminal accessible with analog supply from 2.4 to 3.6 V
LQFP48 (7x7 mm)
UFQFPN32 (5x5 mm)
WLCSP49 (3.417x3.151 mm)
• Up to 17 capacitive sensing channels supporting touchkey, linea.
2020-05-08 : AM5726 AM5716 AM5728 AM5729 R3710 WM1811G BA12004DF-Z MMBZ20VAL NC7SZ19 BA12003DF-Z