www.DataSheet4U.com
GaAs SP4T Switch 5 - 2000 MHz
Features
q q q q
SW-255
V3.00
DI-5
Low Insertion Loss, 1.0 dB Typi...
www.DataSheet4U.com
GaAs SP4T Switch 5 - 2000 MHz
Features
q q q q
SW-255
V3.00
DI-5
Low Insertion Loss, 1.0 dB Typical Fast Switching Speed, 20 ns Typical Ultra Low DC Power Consumption, 0.3 mA Typical Integral TTL DRIVER
(From -55°C to +85°C) 5-2000 MHz 2.1 dB Max 1.6 dB Max 1.4 dB Max 2.3:1 Max 1.8:1 Max 1.3:1 Max 35 dB Min 36 dB Min 42 dB Min
Guaranteed Specifications*
Frequency Range Insertion Loss 5-2000 MHz 5-1000 MHz 5-500 MHz 5-2000 MHz 5-1000 MHz 5-500 MHz 5-2000 MHz 5-1000 MHz 5-500 MHz
VSWR
Isolation
Operating Characteristics
Impedance Switching Characteristics Trise, Tfall Ton, Toff (50% CTL to 90/10% RF) Transients (In-Band) Input Power for 1 dB Compression 500-2000 MHz 50 MHz Intermodulation Intercept Point (for two-tone input power up to +13 dBm) Intercept Points 500-2000 MHz 50 MHz Bias Power Environmental MIL-STD-883 screening available.
* All specifications apply when operated with bias
voltage of +5 VDC and 50 ohm impedance at all RF ports.
50 Ohms Nominal (TTL) 7 ns 20 ns 80 mV +27 dBm Typ +21 dBm Typ
Dimensions in ( ) are in mm. Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25) .xx = ±0.02 (.x = ±0.5) WEIGHT (APPROX.): 0.26 OUNCES 73 GRAMS
Schematic
RF 4 RF 3 CTL 4 CTL 3 CTL 2 CTL 1 +VDC NC RF 2 GND
IP2 +68 +60 dBm Typ dBm Typ
GND RF COMMON GND GND GND RF 1
+5 VDC @ 0.30 mA Typ, 1 mA Max
Truth Table
Control Input “1” = Logic High TTL(SW-255) CTL1 CTL2 CTL3 CTL4 1 0 0 0 0 1 0 0 0 0 1 0 0 0 0 1 Condition of Switch RF Common To Each RF Port R...