Ultra-Low Power Integrated UHF Transceiver
SX1211 Transceiver
www.DataSheet4U.com
Ultra-Low Power Integrated UHF Transceiver
ADVANCED COMMUNICATIONS & SENSING
G...
Description
SX1211 Transceiver
www.DataSheet4U.com
Ultra-Low Power Integrated UHF Transceiver
ADVANCED COMMUNICATIONS & SENSING
General Description
The SX1211 is a low cost single-chip transceiver operating in the frequency ranges from 863-870, 902928 MHz and 950-960 MHz. The SX1211 is optimized for very low power consumption (3mA in receiver mode). It incorporates a baseband modem with data rates up to 200 kb/s. Data handling features include a sixty-four byte FIFO, packet handling, automatic CRC generation and data whitening. Its highly integrated architecture allows for minimum external component count whilst maintaining design flexibility. All major RF communication parameters are programmable and most of them may be dynamically set. It complies with European (ETSI EN 300-220 V2.1.1) and North American (FCC part 15.247 and 15.249) regulatory standards.
Features
Low Rx power consumption: 3mA Low Tx power consumption: 25 mA @ +10 dBm Good reception sensitivity: down to -107 dBm at 25 kb/s in FSK, -113 dBm at 2kb/s in OOK Programmable RF output power: up to +12.5 dBm in 8 steps Packet handling feature with data whitening and automatic CRC generation Wide RSSI (Received Signal Strength Indicator) dynamic range, 70dB from Rx noise floor Bit rates up to 200 kb/s, NRZ coding On-chip frequency synthesizer FSK and OOK modulation Incoming sync word recognition Built-in Bit-Synchronizer for incoming data and clock synchronization and recovery 5 x 5 mm TQFN package Optimized Circuit Configur...
Similar Datasheet