Ultra Series™ Crystal Oscillator (VCXO) Si569 Data Sheet
Ultra Low Jitter I2C Programmable VCXO (100 fs), 0.2 to 3000 M...
Ultra Series™ Crystal Oscillator (VCXO) Si569 Data Sheet
Ultra Low Jitter I2C Programmable VCXO (100 fs), 0.2 to 3000 MHz
The Si569 Ultra Series™
voltage-controlled crystal oscillator utilizes Skyworks Solutions’ advanced 4th generation DSPLL® technology to provide an ultra-low jitter, low phase noise clock at any output frequency. The device is user-programmed via simple I2C commands to provide any frequency from 0.2 to 3000 MHz with <1 ppb resolution and maintains exceptionally low jitter for both integer and fractional frequencies across its operating range. On-chip power supply filtering provides industry-leading power supply noise rejection, simplifying the task of generating low jitter clocks in noisy systems that use switched-mode power supplies. Unlike a traditional XO, where a different crystal is required for each output frequency, the Si569 uses one simple crystal and a DSPLL IC-based approach to provide the desired output frequency. The Si569 is factory-configurable for a wide variety of user specifications, including startup frequency, I2C address, output format, and OE pin location/polarity. Specific configurations are factory-programmed at time of shipment, eliminating long lead times associated with custom oscillators.
Pin Assignments
SDA
7
VC 1
6 VDD
OE/FS 2
5 CLK–
5 x 7 mm and 3.2 x 5 mm 2.5 x 3.2 mm
GND
3
4
8
SCL
(Top View)
CLK+
Pin # 1 2
3 4 5 6 7 8
Descriptions VC =
Voltage Control Pin Selectable via ordering option OE = Output enable; FS...