T6817

Dual Triple DMOS Output Driver with Serial Input Control T6817 1. Introduction The T6817 is a fully-protected universal driver interface designed in 0.8-µm BCDMOS technology. It is used to control up to 6 different loads by a microcontroller in automotive and industrial applications. Each of the 3 high-side and 3 low-side drivers is capable of driving currents up to 600 mA. The drivers are freely configurable and can be controlled separately from a standard serial data interface. Therefore, all kinds of loads such as bulbs, resistors, capacitors, and inductors can be combined. The IC design particularly supports applications of H-bridges to drive DC motors. Protection against short-circuit conditions, overtemperature, under- and overvoltage is implemented. Various diagnostic functions and a very low quiescent current in standby mode enable a wide range of applications. Automotive qualification with respect to conducted interferences, EMC and 2-kV ESD protection gives added value www.DataSheet4U.com and enhanced quality for the demands of highly-sophisticated applications. T6817 Driver ICs Application Note 2. Development Board The development board includes the following components: T6817 design software Link cable to PC 25-lead 1:1 Application note Datasheet “T6817: Dual Triple DMOS Output Driver with Serial Input Control” 2.1 Description By means of the PC-controlled development board, a user can adapt the loads (see Figure 2-2 on page 3) easily via row connecto...