SURROUND AMPLIFIER SERVICE MANUAL
TA-SB500WR2
SERVICE MANUAL
Ver. 1.0 2007.03
US Model
• TA-SB500WR2 is the surround amplifier section in DAV-HDX267W/HD...
Description
TA-SB500WR2
SERVICE MANUAL
Ver. 1.0 2007.03
US Model
TA-SB500WR2 is the surround amplifier section in DAV-HDX267W/HDX501W.
SPECIFICATIONS
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 3 ohms loads, both channels driven, from 120 Hz - 20,000 Hz; rated 60 watts per channel minimum RMS power, with no more than 0.7 % total harmonic distortion from 250 milli watts to rated output. Power requirements: Power consumption Dimensions (approx.) 120 V AC, 60 Hz On: 40 W 65 × 89 × 253 mm (2 5/8 × 3 5/8 × 10 inches) (w/h/d) 65 × 89 × 345 mm (2 5/8 3 × 5/8 × 13 5/8 inches) (w/h/d) incl. speaker cord cover 1.3 kg (2 lb 14 oz) 1.4 kg (3 lb 2 oz) incl. speaker cord cover
Mass (approx.)
Amplifier section
Surround mode (reference) RMS output power SL/SR* : 100 W (per channel at 3 ohms, 1 kHz, 10 % THD)
* Depending on the sound field setting and the source, there may be no sound output.
Design and specifications are subject to change without notice.
SURROUND AMPLIFIER
9-887-591-01
2007C05-1 © 2007.03
Sony Corporation
Home Audio Division Published by Sony Techno Create Corporation
http://www.Datasheet4U.com
TA-SB500WR2
Notes on chip component replacement Never reuse a disconnected chip component. Notice that the minus side of a tantalum capacitor may be damaged by heat. UNLEADED SOLDER Boards requiring use of unleaded solder are printed with the leadfree mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not com...
Similar Datasheet