TA8050P
TOSHIBA BIPOLAR LINEAR INTEGRATED CIRCUIT SILICON MONOLITHIC
TA8050P
1.5A MOTOR DRIVER WITH BRAKE FUNCTION
The ...
TA8050P
TOSHIBA BIPOLAR LINEAR INTEGRATED CIRCUIT SILICON MONOLITHIC
TA8050P
1.5A MOTOR DRIVER WITH BRAKE FUNCTION
The TA8050P is a 1.5A motor driver which directly drives a bidirectional DC motor. Inputs DI1 and DI2 are combined to select one of forward, reverse, stop, and brake modes. Since the inputs are TTL-compatible, this IC can be controlled directly from a CPU or other control system. The IC also has various protective functions.
FEATURES
l Bidirectional DC motor driver
l Current capacity
: 1.5A
l Four modes
: Forward, Reverse, Stop, and Brake
Weight: 1.9 g (typ.)
l Recommended operating supply
voltage range: VCC = 6V to 16V
l Protective functions : Thermal Shutdown, Short Circuit Protection, and Over
voltage Shutdown
l Built-in diode for counteracting counter electromotive force
l Plastic HSIP-7 pin
BLOCK DIAGRAM AND PIN LAYOUT
1 2002-03-12
PIN DESCRIPTION
TA8050P
PIN No. 1 2 3 4 5 6 7
SYMBOL DI1 DI2 M (+) GND M (−) NC VCC
DESCRIPTION
Output status control pin. Connects to a PNP-type
voltage comparator.
Connects to the DC motor. Both the sink and the source have a current capacity of 1.5A. Diodes for absorbing counter electromotive force are contained on the VCC and GND sides.
Grounded
Connects to the DC motor together with pin 3 and has the same function as pin 3. This pin is controlled by the inputs from pins 1 and 2.
Not connected. (Electrically, this pin is completely open.)
Power supply pin. This pin has a function to turn off the output when t...