TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA8201AK
BTL Audio Power Amplifier
TA8201AK
The TA8201AK ...
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA8201AK
BTL Audio Power Amplifier
TA8201AK
The TA8201AK is a audio power amplifier for consumer application. This IC is applying BTL system in which output coupling condenser and bootstrap condenser are not necessary and output 17W (VCC = 14.4V, BL =4Ω, THD = 10%) can be obtained. Since the package is a 7 pin SIP, (signal inline package), it greatly simplifies construction of a power amplifier both in design and assembly. It also contains various kind of protector. It is suitable for car−audio power amplifier with high performance.
Features
· High power: POUT (1) = 17W (typ.) (VCC = 14.4V, f = 1kHz, THD = 10%, RL = 4Ω) : POUT (2) = 14W (typ.) (VCC = 13.2V, f = 1kHz, THD = 10%, RL = 4Ω)
· Very few external parts · Built in protector circuit
Thermal shut down, over
voltage protector (typ. VCC = 24V) ASO protector (RL short, Out to GND, Out to VCC) · 7 pin small package · Operating supply
voltage range: VCC = 9~18V
Weight: 2.19g (typ.)
1 2002-10-30
Block Diagram
+ -
Directions For Use And Application Method
1.
Voltage gain adjustment
TA8201AK
This IC has the amplifier construction as shown in Fig.1. The pre-amp. Amp 1 is provided to the primary stage, and the input
voltage is amplified by the flat amps, amp 3 and amp 4 of each channel through the phase amp.
Amp 2.
Since the input offset is prevented by pre-amp when VCC is set to on, this circuit can remarkable reduce the pop noise.
The total closed loop gain ...