TC74HCT245AP/AF
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74HCT245AP, TC74HCT245AF
Octal Bus Transcei...
TC74HCT245AP/AF
TOSHIBA
CMOS Digital Integrated Circuit Silicon Monolithic
TC74HCT245AP, TC74HCT245AF
Octal Bus Transceiver (3-state)
The TC74HCT245A is high speed
CMOS OCTAL BUS TRANSCEIVER fabricated with silicon gate C2MOS technology.
It achieves the high speed operation similar to equivalent LSTTL while maintaining the
CMOS low power dissipation.
Its inputs are compatible with TTL, NMOS, and
CMOS output
voltage levels.
It is intended for two-way asynchronous communication between data busses. The direction of data transmission is determined by the level of the DIR input.
The enable input ( G ) can be used to disable the device so that the busses are effectively isolated.
All inputs are equipped with protection circuits against static discharge or transient excess
voltage.
TC74HCT245AP TC74HCT245AF
Features (Note 1) (Note 2)
High speed: tpd = 10 ns (typ.) at VCC = 5 V Low power dissipation: ICC = 4 μA (max) at Ta = 25°C Compatible with TTL outputs: VIL = 0.8 V (max)
VIH = 2.0 V (min) Wide interfacing ability: LSTTL, NMOS,
CMOS Output drive capability: 15 LSTTL loads Symmetrical output impedance: |IOH| = IOL = 6 mA (min) Balanced propagation delays: tpLH ∼− tpHL Pin and function compatible with 74LS245
Weight DIP20-P-300-2.54A SOP20-P-300-1.27A
: 1.30 g (typ.) : 0.22 g (typ.)
Note 1: Do not apply a signal to any bus terminal when it is the output mode. Damage may result.
Note 2: All floating (high impedance) bus terminals must have their input levels ...