TC80310

NXP Semiconductors Data Sheet: Advance Information Alternator regulator with LIN The 80310 is an integrated circuit intended to regulate the output voltage of an automotive alternator. The IC supplies a current via a high-side MOSFET to the excitation coil of the alternator and provides an internal freewheeling diode. It keeps the battery at its nominal charge and delivers current to electrical devices within the vehicle. The 80310 also provides a load response control mechanism (LRC), and has an interface for the industry standard LIN protocol (Revision 1.3) to allow an ECU to control the regulated voltage and the LRC rate among other parameters. The ECU also can read back information about the status of the regulator and the alternator via LIN. It can be programmed for most functions using OTP (Non-volatile memory) and fit a large number of alternators and applications. Document Number: TC80310 Rev. 5.0, 8/2016 80310 AUTOMOTIVE ALTERNATOR REGULATOR Features High-side field driver Internal freewheeling diode Up to 8.0 A rotor current (excitation coil) Load response control (LRC) Thermal protection Thermal compensation LIN interface Set point voltage selectable from 10.6 to 16 V Rotor control and die temperature monitoring via LIN TOP VIEW Ordering information Device Temperature range (TJ) Package Devices part numbers are dependant on programming from factory. TO3 - Contact sales for information on limited engineering sample quantities. Production v...