TCS10DLU

TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TCS10DLU TCS10DLU Digital-Output Magnetic Sensor Feature Open-Drain Output South-Pole or North-Pole Detection UFV Weight: 0.007 g (typ.) Marking LA3 Pin Assignment (top view) VCC (Note1) GND2 (Note 2) 54 1 23 VOUT GND1 NC (Note 2) Function Table Magnetic Flux Density Output ≥ BON ≤ BOFF L Z (Note 3) Note 1: It is recommended to add a capacitor of about 0.1μF between Vcc and GND. Note 2: The GND1 and GND2 pins should be tied to ground. The GND2 pin is used as a test pin during production. Note 3: In the high-impedance state. 1 2009-01-30 TCS10DLU Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Supply Voltage Output Voltage Output Diode Current Output Current Vcc/GND Current Power Dissipation Storage Temperature Range VCC VOUT IOK IOUT ICC PD Tstg −0.5 to 6.0 −0.5 to 6.0 -10 5 ±10 200 −65 to 150 V V mA mA mA mW °C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reli...