INTEGRATED CIRCUITS
DATA SHEET
TDA3617 Multiple voltage regulator
Preliminary specification File under Integrated Circu...
INTEGRATED CIRCUITS
DATA SHEET
TDA3617 Multiple
voltage regulator
Preliminary specification File under Integrated Circuits, IC01 1999 Jul 14
Philips Semiconductors
Preliminary specification
Multiple
voltage regulator
FEATURES General Three VP-state controlled regulators (regulators 1, 2 and 3) Very good stability and noise behaviour Separate control pins for switching regulators 1, 2 and 3 Supply
voltage range from −18 to +50 V Low quiescent current (when regulators 1, 2 and 3 are switched off) High ripple rejection Hold output for indicating regulator 1 and/or 2 and/or 3 out of regulation. Protections Reverse polarity safe (down to −18 V without high reverse current) Able to withstand
voltages up to 18 V at the outputs (supply line may be short circuited) ESD protection on all pins QUICK REFERENCE DATA SYMBOL Supply VP supply
voltage operating jump start load dump protection Iq(tot) Tj VREG1 VREG2 VREG3 total quiescent current junction temperature 1 mA ≤ IREG1 ≤ 1.3 A 1 mA ≤ IREG2 ≤ 600 mA; VP = 14.4 V 1 mA ≤ IREG3 ≤ 300 mA t ≤ 10 minutes for 50 ms; tr ≥ 2.5 ms standby mode 9.5 − − − − 8.55 4.75 3.14 14.4 − − 5 − 9.0 5.0 3.3 PARAMETER CONDITIONS MIN. TYP. Thermal protection Load dump protection Foldback current limit protection for regulators 1, 2 and 3
TDA3617
DC short-circuit safe to ground and VP for all regulator outputs. GENERAL DESCRIPTION The TDA3617J is a multiple output
voltage regulator with three independent regulators. It contains...