TDA7521
Analog Front End
PRODUCT PREVIEW
TDA7521 is a BiCMOS analog front end for CD applications. Four input signals (...
TDA7521
Analog Front End
PRODUCT PREVIEW
TDA7521 is a Bi
CMOS analog front end for CD applications. Four input signals (AC*, BD*, E* and F*), coming from the pick-up (whose laser diode is driven and controlled by the device itself), are preamplified by a programmable
voltage-to-
voltage or current-to
voltage stage, depending on the used pick-up. The output signals from the preamplifier stage (AC, BD, E, F and HF, a radio frequency signal obtained by combining the photo-detector outputs as A+B+C+D) are fed to an 8-bit HF ADC (for HF, which carries encoded audio data) and a 6-bit Servo ADC (for AC, BD, E and F, used for focusing, tracking the laser beam and controlling revolution speed). All these signals are digitized, multiplexed, synchronized with the external clock (768×Fs or 394×Fs, Fs=44.1KHz) and fed to the digital counterpart in one only digital stream (AC/HF/ BD/HF/E/HF/F/HF). Two stereo DACs convert the input bitstreams from TDA7522.
TQFP44 (10 x 10 x 1.40 mm body)
All the clock signals (for ADCs and DACs) are generated by a low-jitter PLL-based clock manager. All TDA7521’s analog preprocessing is controlled by TDA7522 by means of an UART interface (which imple×10mm package, TDA7521 features the functions ments an I2C-like protocol). Housed in a TQFP 44, 10 shown in figure below. TDA7521 uses the HF4
CMOS technology and is supplied @5Vdc.
May 1998
This is preliminary information on a new product now in development. Details are subject to change without notice.
1/11
...