TDA7563

TDA7563 MULTIFUNCTION QUAD POWER AMPLIFIER WITH BUILT-IN DIAGNOSTICS FEATURES s s s s s DMOS POWER OUTPUT NON-SWITCHING HI-EFFICIENCY HIGH OUTPUT POWER CAPABILITY 4x28W/ 4Ω @ 14.4V, 1KHZ, 10% THD, 4x40W EIAJ MAX. OUTPUT POWER 4x72W/2Ω FULL I2C BUS DRIVING: – ST-BY – INDEPENDENT FRONT/REAR SOFT PLAY/ MUTE – SELECTABLE GAIN 30dB – 16dB (FOR LOW NOISE LINE OUTPUT FUNCTION) – HIGH EFFICIENCY ENABLE/DISABLE – I2C BUS DIGITAL DIAGNOSTICS FULL FAULT PROTECTION DC OFFSET DETECTION FOUR INDEPENDENT SHORT CIRCUIT PROTECTION CLIPPING DETECTOR PIN WITH SELECTABLE THRESHOLD (2%/10%) ST-BY/MUTE PIN LINEAR THERMAL SHUTDOWN ESD PROTECTION MULTIPOWER BCD TECHNOLOGY MOSFET OUTPUT POWER STAGE FLEXIWATT27 ORDERING NUMBER: TDA7563 s s s s s s s DESCRIPTION The TDA7563 is a new BCD technology Quad Bridge type of car radio amplifier in Flexiwatt27 package specially intended for car radio applications. Thanks to the DMOS output stage the TDA7563 has a very low distortion allowing a clear powerful sound. Among the features, its superior efficiency performance coming from the internal exclusive structure, makes it the most suitable device to simplify the thermal management in high power sets.The dissipated output power under average listening condition is in fact reduced up to 50% when compared to the level provided by conventional class AB solutions.This device is equipped with a full diagnostics array that communicates the status of each speaker through the I 2C bus. BLOCK DIAGRAM CLK ST-BY/MUT...