DatasheetsPDF.com

TDA8001 Datasheet

Part Number TDA8001
Manufacturers NXP
Logo NXP
Description Smart card interface
Datasheet TDA8001 DatasheetTDA8001 Datasheet (PDF)

INTEGRATED CIRCUITS DATA SHEET TDA8001 Smart card interface Product specification Supersedes data of 1995 Feb 01 File under Integrated Circuits, IC02 1996 Dec 12 Philips Semiconductors Product specification Smart card interface FEATURES • Protected I/O line • VCC regulation (5 V ±5%, 100 mA max. with controlled rise and fall times) • VPP generation (12.5, 15 or 21 V ±2.5%, 50 mA max., with controlled rise and fall times) (only at TDA8001 and TDA8001T) • Clock generation (up to 10 MHz), with s.

  TDA8001   TDA8001






Part Number TDA8008
Manufacturers NXP
Logo NXP
Description Dual multiprotocol smart card coupler
Datasheet TDA8001 DatasheetTDA8008 Datasheet (PDF)

INTEGRATED CIRCUITS DATA SHEET TDA8008 Dual multiprotocol smart card coupler Objective specification File under Integrated Circuits, IC02 1999 Dec 14 Philips Semiconductors Objective specification Dual multiprotocol smart card coupler FEATURES • 8xC51 core with 16 kbytes or EPROM (TDA8008), 256 bytes RAM, 512 bytes AUXRAM, Timer 0, 1, 2 and enhanced UART • Specific ISO 7816 UART, accessible with MOVX instructions for automatic convention processing, variable baud rate through frequency or div.

  TDA8001   TDA8001







Part Number TDA8007BHL
Manufacturers NXP
Logo NXP
Description Multiprotocol IC card interface
Datasheet TDA8001 DatasheetTDA8007BHL Datasheet (PDF)

TDA8007BHL Multiprotocol IC card interface Rev. 9.1 — 18 June 2012 Product data sheet 1. General description The TDA8007BHL is a cost-effective card interface for dual smart card readers. Controlled through a parallel bus, it meets all requirements of ISO 7816, GSM 11-11, EMV4.2 and EMV 2000. It is addressed on a non-multiplexed 8-bit databus, by means of address registers AD0, AD1, AD2 and AD3. TDA8007BHL/C3 can be also addressed through a multiplexed access. The integrated ISO UART and the t.

  TDA8001   TDA8001







Part Number TDA8007B
Manufacturers NXP
Logo NXP
Description Double multiprotocol IC card interface
Datasheet TDA8001 DatasheetTDA8007B Datasheet (PDF)

INTEGRATED CIRCUITS DATA SHEET TDA8007B Double multiprotocol IC card interface Product specification Supersedes data of 2002 Nov 15 2003 Feb 18 Philips Semiconductors Double multiprotocol IC card interface Product specification TDA8007B CONTENTS 1 2 3 4 5 6 7 8 8.1 8.1.1 8.1.2 8.2 8.2.1 8.2.2 8.2.3 8.2.4 8.3 8.4 8.5 8.6 8.7 9 10 11 12 13 14 FEATURES APPLICATIONS GENERAL DESCRIPTION QUICK REFERENCE DATA ORDERING INFORMATION BLOCK DIAGRAM PINNING FUNCTIONAL DESCRIPTION Interface control Mult.

  TDA8001   TDA8001







Part Number TDA8006
Manufacturers NXP
Logo NXP
Description Multiprotocol IC Card coupler
Datasheet TDA8001 DatasheetTDA8006 Datasheet (PDF)

INTEGRATED CIRCUITS DATA SHEET TDA8006 Multiprotocol IC Card coupler Product specification Supersedes data of 1998 Aug 18 File under Integrated Circuits, IC02 2000 Feb 21 Philips Semiconductors Product specification Multiprotocol IC Card coupler FEATURES • 80C52 core with 16 kbyte ROM and 256 byte RAM • Extra 1 kbyte RAM outside the core for data storage • Control and communication through a standard RS232 full duplex interface or a parallel interface • Specific ISO 7816 UART with parallel ac.

  TDA8001   TDA8001







Part Number TDA8005A
Manufacturers NXP
Logo NXP
Description Low-power 3 V/5 V smart card coupler
Datasheet TDA8001 DatasheetTDA8005A Datasheet (PDF)

INTEGRATED CIRCUITS DATA SHEET TDA8005A Low-power (3 V/5 V) smart card coupler Preliminary specification File under Integrated Circuits, IC17 1998 Mar 20 Philips Semiconductors Preliminary specification Low-power (3 V/5 V) smart card coupler FEATURES • Smart card supply (5 and 3 V ±5%, 20 mA maximum with controlled rise and fall times) • Smart card clock generation (up to 8 MHz), with two times synchronous frequency doubling • Clock STOP HIGH, clock STOP LOW or 1.25 MHz (from internal oscilla.

  TDA8001   TDA8001







Smart card interface

INTEGRATED CIRCUITS DATA SHEET TDA8001 Smart card interface Product specification Supersedes data of 1995 Feb 01 File under Integrated Circuits, IC02 1996 Dec 12 Philips Semiconductors Product specification Smart card interface FEATURES • Protected I/O line • VCC regulation (5 V ±5%, 100 mA max. with controlled rise and fall times) • VPP generation (12.5, 15 or 21 V ±2.5%, 50 mA max., with controlled rise and fall times) (only at TDA8001 and TDA8001T) • Clock generation (up to 10 MHz), with synchronous frequency doubling • Overload, thermal and card extraction protections • Current limitation in case of short-circuit • Idle mode and special circuitry for spikes killing during powering on and off • Two voltage supervisors (digital and analog supplies) • Automatic activation and deactivation sequences through an independent internal clock • Enhanced ESD protections on card side (4 kV min.) • Easy chaining for multiple card readers • ISO 7816 compatibility. ORDERING INFORMATION TYPE NUMBER TDA8001; TDA8001A TDA8001T; TDA8001AT PACKAGE NAME DIP28 SO28 DESCRIPTION plastic dual in-line package; 28 leads (600 mil) plastic small outline package; 28 leads; body width 7.5 mm APPLICATIONS TDA8001 • Pay TV (multistandards conditional access system, videoguard, newscript) • Multi-application smart card readers (banking, vending machine, electronic payment identification). GENERAL DESCRIPTION The TDA8001 is a complete, low-cost analog interface which can be positioned between an async.


2005-04-16 : LA5603    MLED930    M38198    BU2527A    F4500    ES07D    FDI047AN08A0    FMMT2484    FQP90N10V2    FQPF90N10V2   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)