TDA8944AJ
2 x 7 W BTL audio amplifier with DC gain control
Rev. 01 — 01 March 2002
M3D541
Product data
1. General des...
TDA8944AJ
2 x 7 W BTL audio amplifier with DC gain control
Rev. 01 — 01 March 2002
M3D541
Product data
1. General description
The TDA8944AJ is a dual-channel audio power amplifier with DC gain control. It has an output power of 2 × 7 W at an 8 Ω load and a 12 V supply. The circuit contains two Bridge-Tied Load (BTL) amplifiers with an all-NPN output stage and standby/mute logic. The overall gain can be adjusted from +30 dB down to −50 dB using a DC control
voltage. This feature can be used for volume control or a preset gain. The TDA8944AJ comes in a 17-pin DIL-bent-SIL (DBS) power package and is pin compatible with the TDA8944J.
2. Features
s Gain/volume adjustment via a DC control pin s Soft clipping s Operating at a low supply
voltage s Standby and mute mode s No on/off switching plops s Low standby current s High supply
voltage ripple rejection s Outputs short-circuit protected to ground, supply and across the load s Thermally protected s Printed-circuit board compatible with TDA8946AJ and TDA8580J.
3. Applications
s Mains fed applications (e.g. TV sound) s PC audio s Portable audio.
4. Quick reference data
Table 1: Quick reference data Symbol Parameter VCC supply
voltage Iq quiescent supply current Istb standby supply current Po output power
THD total harmonic distortion
Conditions
VCC = 12 V; RL = ∞
THD = 10%; RL = 8 Ω; VCC = 12 V Po = 1 W
Min Typ Max Unit
4.5 12 18 V
- 40 50 mA
- - 10 µA
67-
W
- 0.07 0.5 %
Philips Semiconductors
TDA8944AJ
2 x 7 W BTL au...