TDF8597
I2C-bus controlled dual channel 43 W/2 , single channel 85 W/1 class-D power amplifier with full diagnostics...
TDF8597
I2C-bus controlled dual channel 43 W/2 , single channel 85 W/1 class-D power amplifier with full diagnostics
Rev. 1 — 17 November 2011
Preliminary short data sheet
1. General description
The TDF8597 is a dual Bridge-Tied Load (BTL) car audio amplifier comprising an NDMOST-NDMOST output stage based on SOI BCDMOS technology. The TDF8597 fully supports start/stop systems as it can operate at a battery
voltage as low as 6 V. The TDF8597 can be controlled with or without I2C. I2C allows control of load detection results and fault conditions to be read. The TDF8597 is a high efficiency class-D amplifier with low dissipation. Due to the low dissipation, the device can be used with a smaller heat sink than standard class AB
amplifiers. Six different I2C addresses can be selected with external resistors connected to the ADS and MOD pins. If pin ADS is a short-circuit to ground, the TDF8597 operates in non-I2C mode, and no I2C communication is possible. Use pins EN and ON to...