INTEGRATED CIRCUITS
DATA SHEET
TEA1102; TEA1102T; TEA1102TS Fast charge ICs for NiCd, NiMH, SLA and LiIon
Preliminary ...
INTEGRATED CIRCUITS
DATA SHEET
TEA1102; TEA1102T; TEA1102TS Fast charge ICs for NiCd, NiMH, SLA and LiIon
Preliminary specification Supersedes data of 1997 Oct 09 File under Integrated Circuits, IC03 1999 Jan 27
Philips Semiconductors
Preliminary specification
Fast charge ICs for NiCd, NiMH, SLA and LiIon
FEATURES Safe and fast charging of Nickel Cadmium (NiCd), Nickel Metal Hydride (NiMH), Lithium Ion (LiIon), and Sealed Lead Acid (SLA) batteries Three charge states for NiCd or NiMH; fast, top-off and trickle or
voltage regulation (optional) Two charge states for LiIon or SLA; current and
voltage limited Adjustable fast charge current [0.5CA to 5CA nominal (CA = Capacity Amperes)] DC top-off and pulsating trickle charge current (NiCd and NiMH) Temperature dependent ∆T/∆t battery full detection Automatic switch-over to accurate peak
voltage detection (−1⁄4%) if no NTC is applied Possibility to use both ∆T/∆t and peak
voltage detection as main fast charge termination Support of inhibit during all charging states Manual refresh with regulated adjustable discharge current (NiCd and NiMH)
Voltage regulation in the event of no battery Support of battery
voltage based charge indication and buzzer signalling at battery insertion, end of refresh and at full detection Single, dual and separate LED outputs for indication of charge status state Minimum and maximum temperature protection Time-out protection Short-circuit battery
voltage protection Can...