THCV241A Datasheet


Part Number

THCV241A

Description

SerDes transmitter

Manufacture

THine Electronics

Total Page 30 Pages
PDF Download
Download THCV241A Datasheet


Features Datasheet pdf THCV241A_Rev.1.00_E THCV241A SerDes tra nsmitter with bi-directional transceive r 1 General Description THCV241A is de signed to support 1080p60 2Mpixel uncom pressed video data over 15m 100ohm diff erential STP or single-end 50ohm Coaxia l cable with 4 in-line connectors betwe en camera and processor by V-by-One® H S. THCV241A supports a MIPI CSI-2. Each CSI-2 data lane can transmit up to 1.2 Gbps/lane. Virtual channel is supported . One high-speed V-by-One® HS lane can transmit up to 1080p60fps. The maximum serial data rate is 4Gbps/lane. 2nd ou tput lane supports HDR large amount of data or data copy-and-distribution expe rience. THCV241A is capable to control and monitor camera module from remote E CU via GPIO, UART or 1Mbps 2-wire seria l interface. Several fault and error de tection function including CRC provides hardware functional safety design. 2 Features  MIPI CSI-2 with 1,2 or 4-l ane input  MIPI D-PHY supports 80Mbp s~1.2Gbps  MIPI Virtual channel supported  Video formats: RAW8/10/1.
Keywords THCV241A, datasheet, pdf, THine Electronics, SerDes, transmitter, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent

THCV241A Datasheet
THCV241A_Rev.1.00_E
THCV241A
SerDes transmitter with bi-directional transceiver
1 General Description
THCV241A is designed to support 1080p60 2Mpixel
uncompressed video data over 15m 100ohm
differential STP or single-end 50ohm Coaxial cable
with 4 in-line connectors between camera and
processor by V-by-One® HS.
THCV241A supports a MIPI CSI-2. Each CSI-2 data
lane can transmit up to 1.2Gbps/lane. Virtual channel
is supported.
One high-speed V-by-One® HS lane can transmit up
to 1080p60fps. The maximum serial data rate is
4Gbps/lane. 2nd output lane supports HDR large
amount of data or data copy-and-distribution
experience.
THCV241A is capable to control and monitor
camera module from remote ECU via GPIO, UART or
1Mbps 2-wire serial interface.
Several fault and error detection function including
CRC provides hardware functional safety design.
2 Features
MIPI CSI-2 with 1,2 or 4-lane input
MIPI D-PHY supports 80Mbps~1.2Gbps
MIPI Virtual channel supported
Video formats: RAW8/10/12/14/16/20,
YUV422/420, RGB888/666/565, JPEG, User-
defined generic 8-bit
V-by-One® HS 400Mbps~4Gbps x2lane
V-by-One® HS standard version1.5
Reference clock input CKI range 10~40MHz
shareable with video source CMOS sensor
Wide range IO voltage from 1.7V to 3.6V
Additional spread spectrum to reduce EMI
2-wire serial interface 1Mbps bridge function
Remote GPIO/UART control and monitoring
Error detection including CRC and notification
QFN40 5x5mm 0.4mm pitch Exp-pad package
3 Block Diagram
MIPI CSI-2
Rx 4-lane
RD3p
RD3n
RD1p
RD1n
RCKp
RCKn
RD0p
RD0n
RD2p
RD2n
CKI
Settings
GPIO
2-wire
serial I/F
THCV241A
Controls
OSC
V-by-One® HS
Tx 2 lane
TX0N
TX0P
TX1N
TX1P
Sub-Link
TCMN
TCMP
Copyright©2019 THine Electronics, Inc.
1/70
THine Electronics, Inc.
Security D




@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)